[Q55-Q75] Tested Material Used To HPE7-A01 Test Engine Exam Questions in here [Jul-2025]

20 Jul, 2025 By admin HPE7-A01, HP 0 Comments

[Q55-Q75] Tested Material Used To HPE7-A01 Test Engine Exam Questions in here [Jul-2025]

Rate this post

Tested Material Used To HPE7-A01 Test Engine Exam Questions in here [Jul-2025]

Penetration testers simulate HPE7-A01 exam PDF

HPE7-A01 certification exam is an online, proctored exam that consists of 60 multiple-choice questions. Candidates will have 90 minutes to complete the exam, and the passing score is 70%. HPE7-A01 exam fee is $200, and it can be taken at any time from any location. Candidates who pass the exam will receive the Aruba Certified Campus Access Professional (ACCP) certification, which is valid for three years.

Q55. Which method is used to onboard a new UXI in an existing environment with 802 1X authentication?
(The sensor has no cellular connection)

Use the UXI app on your smartphone and connect the UXI via Bluetooth

Connect the new UXI from an already installed one and adjust the initial configuration.

Use the Aruba installer app on your smartphone to scan the barcode

Use the CLI via the serial cable and adjust the initial configuration.

Q56. Your manufacturing client is deploying two hundred wireless IP cameras and fifty headless scanners in their warehouse. These new devices do not support 802.1X authentication.
How can HPE Aruba enhance security for these new IP cameras in this environment?

Use MPSK Local to automatically provide unique pre-shared Keys for devices.

Aruba ClearPass performs the 802.1X authentication and installs a certificate.

MPSK provides for each device in the WLAN to have its own unique pre-shared Key.

MPSK Local will allow the cameras to share a rey and the scanners to share a different

Q57. Refer to the exhibit. A company has deployed 200 AP-635 access points. To but is not working as expected.
What would be the correct action to fix the issue?

Change the SSID to WPA3-Enhanced Open

Change the SSID to WPA3-Enterprise (CCM).

Change the SSID to WPA3-Personal

Change the SSID to WPA3-Enterpnse (CNSA).

Q58. With the Aruba CX 6000 24G switch with uplinks of 1/1/25 andwhat does the switch do when a client port detects a loop and the do-not-disabie parameter is used?

Port status will be validated once status is cleared

An event log message is created.

The network analytics engine is triggered.

Port status led blinks in amber with 100hz.

Q59. Using Aruba best practices what should be enabled for visitor networks where encryption is needed but authentication is not required?

Wi-Fi Protected Access 3 Enterprise

Opportunistic Wireless Encryption

Wired Equivalent Privacy

Open Network Access

Q60. A customer is using Aruba Cloud Guest, but visitors keep complaining that the captive portal page keeps coming up after devices go to sleep.
Which solution should be enabled to deal with this issue?

MAC Caching under the splash page

MAC Caching under the user-role

Wireless Caching under the splash page

MAC Caching under the WLAN

Q61. A client is connecting to 802.1X SSID that has been configured in tunnel mode with the default AP- group settings.
After receiving Access-Accept from the RADIUS server, the Aruba Gateway will send Access- Accept to the AP through which tunnel?

IPsec tunnel

Split tunnel

GRE tunnel

PAR tunnel

Q62. Review the exhibit.

You are troubleshooting an issue with a 10 102.39 0/24 subnet which is also VLAN 1000 used Tor wireless clients on a pair of Aruba CX 8360 switches The subnet SVI is configured on the 8360 pair, and the DHCP server is a Microsoft Windows Server 2022 Standard with an IP address of 10 200 1.100. The 10.102.250.0/24 subnet is used for switch management.
A large number of DHCP requests are failing You are observing sporadic DHCP behavior across clients attached to the CX 6100 switch.
Which action may help fix the issue?

Q63. Refer to the exhibit. With Core-1, what is the default value for config-revision?

1-0

0. 0

Q64. You need to ensure that voice traffic sent through an ArubaOS-CX switch arrives with minimal latency What is the best scheduling technology to use for this task?

Strict queuing

Rate limiting

QoS shaping

DWRR queuing

Q65. A customer is using Aruba Cloud Guest, but visitors keep complaining that the captive portal page keeps coming up after devices go to sleep Which solution should be enabled to deal with this issue?

MAC Caching under the splash page

MAC Caching under the user-role

Wireless Caching under the splash page

MAC Caching under the WLAN

Q66. Describe the difference between Class of Service (CoS) and Differentiated Services Code Point (DSCP).

CoS has much finer granularity than DSCP

CoS is only contained in VLAN Tag fields DSCP is in the IP Header and preserved throughout the IP packet flow

They are similar and can be used interchangeably.

CoS is only used to determine CLASS of traffic DSCP is only used to differentiate between different Classes.

Q67. What is the order of operations tor Key Management service for a wireless client roaming from AP1 to AP2?

Q68. You are doing tests in your lab and with the following equipment specifications:
* AP1 has a radio that generates a 20 dBm signal
* AP2 has a radio that generates a 8 dBm signal
* AP1 has an antenna with a gain of 7 dBI.
* AP2 has an antenna with a gain of 12 dBI.
* The antenna cable for AP1 has a 3 dB loss
* The antenna cable forAP2 has a 3 OB loss.
What would be the calculated Equivalent Isotropic Radiated Power (EIRP) for AP1?

2dBm

8 dBm

22 dBm

24 dBm

Q69. You are building a configuration in Central that will be used for a standardized network design for small sites for your company, you want to use GUI configuration for gateways and Aps, while template configuration for switches. You need to align with Aruba best practices.
Which set of actions will satisfy these requirements?

Create one group in Central for switches a second group for APs. and a third group for gateways Create a unique site for each location, and assign devices to the appropriate site.

Create one group in Central for switches and a second group for APs and gateways. Create a unique site for each location, and assign devices to the appropriate site.

Create a single group in Central. Create a unique site for each location, and assign devices to the appropriate site.

Create a single group in Central. Create a unique site for each type of device, and assign devices to the appropriate site.

Q70. Your customer is having issues with Wi-Fi 6 clients staying connected to poor-performing APs when a higher throughput APs are closer.
Which technology should you implement?

Clearpass

ClientMatch

Airmatch

ARM

Q71. How is Dynamic Multicast Optimization (DMO) implemented in an HPE Aruba wireless network?
DMO is configured individually tor each SSID in use in the network.
The AP uses OOS to provide equal air time for multicast traffic,
DMO is configured globally for each SSID in use in the network.
The controller converts multicast streams into unicast streams.

DMO is configured individually for each SSID in use in the network.
DMO is a feature that allows the AP to convert multicast streams into unicast streams over the wireless link. This enhances the quality and reliability of streaming video, while preserving the bandwidth available to the non-video clients. DMO is configured individually for each SSID in use in the network, as different SSIDs may have different multicast requirements.
According to the Aruba document Configuring WLAN Settings for an SSID Profile, one of the steps to configure DMO is:
Dynamic multicast optimization: Select Enabled to allow IAP to convert multicast streams into unicast streams over the wireless link. Enabling Dynamic Multicast Optimization (DMO) enhances the quality and reliability of streaming video, while preserving the bandwidth available to the non-video clients.
The other options are incorrect because:

The AP does not use QoS to provide equal air time for multicast traffic. QoS is a feature that prioritizes different types of traffic based on their importance and latency sensitivity. QoS does not affect how multicast streams are transmitted over the wireless link.

DMO is not configured globally for each SSID in use in the network. DMO is configured individually for each SSID, as different SSIDs may have different multicast requirements.

The controller does not convert multicast streams into unicast streams. The AP does the conversion, as it is closer to the wireless clients and can optimize the transmission based on the client capabilities and channel conditions.

Q72. With the Aruba CX switch configuration, what is the Active Gateway feature that is used for and is unique to VSX configuration?

Sixteen different VMACs are supported total as shared.

Active Gateway can once MSTP instances are created for VLAN load sharing.

Sixteen different VMACS are supported for each IPV4 and IPV6 stack simultaneously

copied over the ISL link for an optimized path.

Q73. What is a primary benefit of BSS coloring?

BSS color tags improve performance by allowing APS on the same channel to be farther apart

BSS color tags improve security by identifying rogue APS and tagging them as threats.

BSS color tags are applied on the wireless controllers and can reduce the threshold for interference_

BSS color tags are applied to WI-Fi channels and can reduce the threshold tor interference

Q74. Which Aruba AP mode is sending captured RF data to Aruba Central for waterfall plot?

Air Monitor

Dual Mode

Hybrid Mode

Spectrum Monitor

Q75. The customer needs a network hardware refresh to replace an aging Aruba 5406R core switch pair using spanning tree configuration with Aruba CX 8360-32YC switches What is the benefit of VSX clustering with the new solution?

stacked data-plane

faster MSTP converge processing

dual Aruba AP LAN port connectivity for PoE redundancy

dual control plane provides better resiliency

HP HPE7-A01 certification exam is an important credential that validates the skills and knowledge of IT professionals in designing and implementing enterprise-level wireless LAN solutions. HPE7-A01 exam is intended for individuals who have experience in configuring and troubleshooting Aruba products and solutions in complex environments. Aruba Certified Campus Access Professional Exam certification is ideal for network professionals, wireless engineers, and system administrators who want to enhance their skills in wireless networking and become Aruba Certified Campus Access Professionals.

Authentic Best resources for HPE7-A01 Online Practice Exam: https://www.premiumvcedump.com/HP/valid-HPE7-A01-premium-vce-exam-dumps.html

Premium VCE Dumps

Premium VCE Dumps

[Q55-Q75] Tested Material Used To HPE7-A01 Test Engine Exam Questions in here [Jul-2025]

Leave a Reply Cancel reply