Q55. Which method is used to onboard a new UXI in an existing environment with 802 1X authentication?
(The sensor has no cellular connection)

Q56. Your manufacturing client is deploying two hundred wireless IP cameras and fifty headless scanners in their warehouse. These new devices do not support 802.1X authentication.
How can HPE Aruba enhance security for these new IP cameras in this environment?

Q57. Refer to the exhibit. A company has deployed 200 AP-635 access points. To but is not working as expected.
What would be the correct action to fix the issue?

Q58. With the Aruba CX 6000 24G switch with uplinks of 1/1/25 andwhat does the switch do when a client port detects a loop and the do-not-disabie parameter is used?

Q59. Using Aruba best practices what should be enabled for visitor networks where encryption is needed but authentication is not required?

Q60. A customer is using Aruba Cloud Guest, but visitors keep complaining that the captive portal page keeps coming up after devices go to sleep.
Which solution should be enabled to deal with this issue?

Q61. A client is connecting to 802.1X SSID that has been configured in tunnel mode with the default AP- group settings.
After receiving Access-Accept from the RADIUS server, the Aruba Gateway will send Access- Accept to the AP through which tunnel?

Q62. Review the exhibit.

You are troubleshooting an issue with a 10 102.39 0/24 subnet which is also VLAN 1000 used Tor wireless clients on a pair of Aruba CX 8360 switches The subnet SVI is configured on the 8360 pair, and the DHCP server is a Microsoft Windows Server 2022 Standard with an IP address of 10 200 1.100. The 10.102.250.0/24 subnet is used for switch management.
A large number of DHCP requests are failing You are observing sporadic DHCP behavior across clients attached to the CX 6100 switch.
Which action may help fix the issue?

Q63. Refer to the exhibit. With Core-1, what is the default value for config-revision?

Q64. You need to ensure that voice traffic sent through an ArubaOS-CX switch arrives with minimal latency What is the best scheduling technology to use for this task?

Q65. A customer is using Aruba Cloud Guest, but visitors keep complaining that the captive portal page keeps coming up after devices go to sleep Which solution should be enabled to deal with this issue?

Q66. Describe the difference between Class of Service (CoS) and Differentiated Services Code Point (DSCP).

Q67. What is the order of operations tor Key Management service for a wireless client roaming from AP1 to AP2?

Q68. You are doing tests in your lab and with the following equipment specifications:
* AP1 has a radio that generates a 20 dBm signal
* AP2 has a radio that generates a 8 dBm signal
* AP1 has an antenna with a gain of 7 dBI.
* AP2 has an antenna with a gain of 12 dBI.
* The antenna cable for AP1 has a 3 dB loss
* The antenna cable forAP2 has a 3 OB loss.
What would be the calculated Equivalent Isotropic Radiated Power (EIRP) for AP1?

Q69. You are building a configuration in Central that will be used for a standardized network design for small sites for your company, you want to use GUI configuration for gateways and Aps, while template configuration for switches. You need to align with Aruba best practices.
Which set of actions will satisfy these requirements?

Q70. Your customer is having issues with Wi-Fi 6 clients staying connected to poor-performing APs when a higher throughput APs are closer.
Which technology should you implement?

Q71. How is Dynamic Multicast Optimization (DMO) implemented in an HPE Aruba wireless network?
DMO is configured individually tor each SSID in use in the network.
The AP uses OOS to provide equal air time for multicast traffic,
DMO is configured globally for each SSID in use in the network.
The controller converts multicast streams into unicast streams.

Q72. With the Aruba CX switch configuration, what is the Active Gateway feature that is used for and is unique to VSX configuration?

Q73. What is a primary benefit of BSS coloring?

Q74. Which Aruba AP mode is sending captured RF data to Aruba Central for waterfall plot?

Q75. The customer needs a network hardware refresh to replace an aging Aruba 5406R core switch pair using spanning tree configuration with Aruba CX 8360-32YC switches What is the benefit of VSX clustering with the new solution?