Maximum Grades By Making ready With H35-580_V2.0 Dumps UPDATED 2026 [Q32-Q55]

2 Aug, 2026 By admin H35-580_V2.0, Huawei 0 Comments

Maximum Grades By Making ready With H35-580_V2.0 Dumps UPDATED 2026 [Q32-Q55]

Rate this post

Maximum Grades By Making ready With H35-580_V2.0 Dumps UPDATED 2026

Prepare H35-580_V2.0 Exam Questions [2026] Recently Updated Questions

Huawei H35-580_V2.0 Exam Overview:

Certification Vendor:	Huawei
Exam Name:	HCIA-5G-RNP&RNO V2.0
Exam Number:	H35-580_V2.0
Related Certifications:	HCIA-5G-RNP&RNO
Passing Score:	600/1000
Available Languages:	English
Certificate Validity Period:	3 Years
Exam Format:	Single Answer, Multiple Answer, True/False
Exam Price:	$200 USD
Real Exam Qty:	60
Exam Duration:	90 minutes
Sample Questions:	Huawei H35-580_V2.0 Sample Questions
Exam Way:	Pearson VUE Authorized Test Center or Huawei Authorized Exam Platform
Pre Condition:	Basic knowledge of at least one mobile communication network technology (2G, 3G, or 4G) is recommended.
Official Syllabus URL:	https://e.huawei.com/en/talent/#/cert/product-details?certifiedProductId=357

NO.32 In RAN3.0 version, which of the following PUCCH formats does the base station not support?

Format 1

Format 2

Format 4

Format 3

NO.33 Which of the following modules is responsible for the selection of PCF during the PDU session establishment process?

AUSF

SMF

NSSF

AMF

NO.34 Which of the following are common causes of overshoot coverage?(Select All that Apply)

Reflection in a large amount of water.

The transmit power of a base station is too high.

Signals travel far along a street due to the waveguide effect.

The height of the antenna or AAU is too low.

NO.35 In the window size, the larger the window, the stronger the resistance to delay.

True

False

NO.36 In SA networking, the mobility between adjacent cells on the same frequency can use the redirection process.

True

False

NO.37 In downlink peak rate testing, the modulation and coding scheme (MCS) index must reach 32.

True

False

NO.38 Which of the following channels/signals require demodulation reference signals (DMRSs)?(Select All that Apply)

DPBCH

DPDCCH

DPOSCH

DCSI-RS

NO.39 The UPEU in the BBU5900 needs to be connected to two circuit breakers.

True

False

NO.40 In cases where the same devices are used, which of the following link budget parameters may differ depending on use in either densely populated urban areas or rural areas?(Select All that Apply)

Antenna gain

Area coverage rate

Shadow fading margin

Penetration loss

NO.41 Which of the following protocol layers has been added to the 5G air interface protocol stack compared with
4G?

POCP

RRC

SDAP

MAC

NO.42 As long as the SSB frequency or SCS between the serving cell and the neighboring cell is different, the terminal’s measurement of the neighboring cell is an inter-frequency measurement.

True

False

NO.43 The terminal can send a power control command to the base station to control the transmit power of the PDSCH.

True

False

NO.44 Which of the following common messages need to be scheduled?(Select All that Apply)

Paging

RA Response

SIB

MIB

NO.45 In the uplink power control process, the power control of SRS is related to the power control of which channel?

PRACH

PUSCH

DMRS

PUCCH

NO.46 Which of the following manufacturers was the first to complete the SA functional test of the domestic IMT-2020 5G Promotion Group?

Huawei

Ericsson

ZTE

Nokia

NO.47 In low-frequency scenarios, how does the UE obtain the beam ID of the current SSB?

Obtained through MIB messages

Obtained through PBCH DMRS

Obtained through PBCH physical layer coding information

Obtained through SIB1 message

NO.48 For a 60 kHz SCS configuration, how many time slots are included in a radio frame?

160

NO.49 In SA networking, which of the following is the first step for a UE to perform a cell search?

Obtain the cell signal quality.

Obtain other cell information.

Synchronize frames and obtain PCI group number.

Synchronize half-frames and obtain the ID within a PCI group.

Explanation
According to the 5G SA Cell Search & Network Entry Matrix, the first step for a UE to perform a cell search in SA networking is to synchronize frames and obtain PCI group number. This step involves the following sub-steps:
The UE scans the available frequency range to detect the presence of Synchronization Signal Blocks (SSBs) from different base stations. SSBs are periodic signals that contain essential synchronization and system information for cell search and initial access.
The UE selects an SSB with the strongest signal strength and decodes its Primary Synchronization Signal (PSS) and Secondary Synchronization Signal (SSS). The PSS and SSS are part of the SSB and provide coarse timing synchronization and cell identity information.
The UE uses the PSS and SSS information to synchronize its internal clock with that of the base station and obtain the Physical Cell Identity (PCI) group number. The PCI group number is a 9-bit value that identifies a group of 8 cells that share the same PSS and SSS sequences. The PCI group number ranges from 0 to 1007.
The other steps for a UE to perform a cell search in SA networking are:
Synchronize half-frames and obtain the ID within a PCI group: The UE further synchronizes its timing with the base station by decoding its Narrowband Synchronization Signal (NSSS), which is also part of the SSB. The NSSS provides more precise timing information and the ID within a PCI group, which is a
3-bit value that identifies a specific cell within a PCI group. The ID within a PCI group ranges from 0 to
7. By combining the PCI group number and the ID within a PCI group, the UE can obtain the full PCI, which is a 10-bit value that uniquely identifies a cell.
Obtain other cell information: The UE decodes other signals and channels in the SSB to acquire other cell information, such as system bandwidth, subcarrier spacing, frame structure, etc. These signals and channels include Demodulation Reference Signals (DMRS), Master Information Block (MIB), System Information Block (SIB), etc.
Obtain the cell signal quality: The UE measures the cell signal quality based on various indicators, such as Reference Signal Received Power (RSRP), Reference Signal Received Quality (RSRQ), Signal-to-Interference-plus-Noise Ratio (SINR), etc. These indicators reflect the strength, quality, and interference level of the received signal.

NO.50 Which of the following protocols/data belong to Layer 3 of the Uu interface?(Select All that Apply)

MAC protocol

RLC protocol

RRC protocol

IP data

NO.51 In NSA networking, which of the following methods can be used to support X2 interconnection between an eNodeB and a gNodeB?(Select All that Apply)

Interconnection through CI interfaces on the UMPT boards in different subracks

Interconnection via backplane in a subrack

Interconnection through HEI interfaces on the UBBP boards in different subracks

IPRAN interconnection between subracks

Explanation
According to the 5G EN-DC Architecture and Interfaces, there are two methods that can be used to support X2 interconnection between an eNodeB and a gNodeB in NSA networking:
Interconnection through CI interfaces on the UMPT boards in different subracks: The UMPT is a universal main processing and transmission unit that provides main processing and transmission functions for a subrack. The UMPT has two CI interfaces that can be used for X2 interconnection with other base stations. The CI interfaces support CPRI, OBSAI, and eCPRI protocols and can use optical fibers or electrical cables for transmission. The CI interfaces can be configured as master or slave interfaces depending on the network topology.
IPRAN interconnection between subracks: IPRAN is an IP-based radio access network that uses IP transport technologies to carry base station traffic over Ethernet or MPLS networks. IPRAN can support X2 interconnection betweendifferent base stations by using IP routers or switches. IPRAN can provide flexible networking, high bandwidth, low latency, and high reliability for X2 interconnection.
The other two methods are not valid for X2 interconnection between an eNodeB and a gNodeB:
Interconnection via backplane in a subrack: This method is only applicable for X2 interconnection between two eNodeBs or two gNodeBs that are installed in the same subrack. The backplane is the internal bus that connects different boards within a subrack. The backplane supports CPRI, OBSAI, and eCPRI protocols and can provide high-speed data transmission between boards.
Interconnection through HEI interfaces on the UBBP boards in different subracks: This method is not supported by Huawei base stations. The HEI interface is a high-speed Ethernet interface that is used for data transmission between base stations and core networks or transport networks. The HEI interface supports S1, Xn, F1, E1, and N2 protocols and can use optical fibers or electrical cables for transmission. The HEI interface cannot be used for X2 interconnection between base stations.
Therefore, the correct answer is A and D.

NO.52 Which of the following boards in a base station support CPU usage measurement?(Select All that Apply)

DFAN

DUB8P

DUPEU

DUMPT

NO.53 In RAN3.0, what is the minimum configuration of PDCCH bandwidth in a cell-specific BWP?

6 RB

24 RB

48 RB

12 RB

NO.54 In cases where the same devices are used, which of the following link budget parameters may differ depending on use in either densely populated urban areas or rural areas? (Select All that Apply)

Antenna gain

Area coverage rate

Shadow fading margin

Penetration loss

NO.55 Which of the following boards in a base station support CPU usage measurement? (Select All that Apply)

DFAN

DUB8P

DUPEU

DUMPT

Huawei H35-580_V2.0 (HCIA-5G-RNP&RNO V2.0) Exam is a challenging and comprehensive certification exam that validates the candidate’s skills and knowledge in the 5G Radio Network Planning and Optimization domain. For professionals who are looking to specialize in the 5G domain, this certification can be a valuable addition to their resume and can help them stand out in a competitive job market.

Give push to your success with H35-580_V2.0 exam questions: https://www.premiumvcedump.com/Huawei/valid-H35-580_V2.0-premium-vce-exam-dumps.html

Premium VCE Dumps

Premium VCE Dumps

Maximum Grades By Making ready With H35-580_V2.0 Dumps UPDATED 2026 [Q32-Q55]

Huawei H35-580_V2.0 Exam Overview:

Leave a Reply Cancel reply