HPE6-A80 PDF Dumps May 27, 2022 Exam Questions – Valid HPE6-A80 Dumps [Q15-Q37]

27 May, 2022 By admin HPE6-A80, HP 0 Comments

HPE6-A80 PDF Dumps May 27, 2022 Exam Questions – Valid HPE6-A80 Dumps [Q15-Q37]

Rate this post

HPE6-A80 PDF Dumps May 27, 2022 Exam Questions – Valid HPE6-A80 Dumps

Ultimate HPE6-A80 Guide to Prepare Free Latest HP Practice Tests Dumps

NEW QUESTION 15
What is one benefit that Airwave provides to customers in the 8.x OS network?

profiling of wired and wireless client behavior and detection when the behavior varies from the baseline

in-depth analytics oT mobile device presence and APIs to make this data available to other applications

a central UI from which to manage all of the Mobility Controllers (MCs)

ability to monitor the status and operation of the complete network over time

NEW QUESTION 16
Refer to the exhibit.

A stadium wants to deploy location-based services, including blue-dot wayfinding over a 200.000 square root (isr580 sq. m) are a. The custom past particular areas. The customer has selected a 1 year subscription.
The exhibit shows the BOM that the architect created in iris.
Which correction should the architect make?

Change the campaign subscription to a Maps subscription.

Add two Maps subscriptions.

Add another campaign subscription.

Remove one Blue Dot Nav subscription.

NEW QUESTION 17
A customer has a large network, which includes a main site and many branch sites. The network has a total of about 10.000 wireless devices at the main site and 15,000 wireless devices total at branches.
To fulfill the requirements for a wireless network upgrade, the architect plans to propose;
* 2 7205 MCs at the main site
* 2 7210 MCs at the main site
* 10 7030 MCs at branch sites
* 200 RAPs at branch sites
* 500 CAPS at the main site
* 300 CAPS at branch sites
What is the most cost-effective Mobility Master solution that meets the requirements’?

MM-HW-5K appliance

MM-HW-5K appliance + MM-HW-5k appliance

MM-HW-1K appliance

MM-HW-1OK appliance

NEW QUESTION 18
Refer to the exhibit.

A customer needs a wireless network upgrade and has these requirements.
– Support any applications used on a wired connection
– Support up to 2500 wireless clients
– Support seamless roaming from floor to floor and building to building
– Continue to function seamlessly if one controller fails
The architect has designed the logical infrastructure for the network as shown in the exhibit Which change should the architect make to belter meet customer requirements and besl practices?

Combine me /25 subnets for wireless and wired users into a /16 subnet.

Install additional Mobility Controller.

Combine the /25 subnets for wireless users into a /20 subnet

Place each controller in a different VLAN and subnet.

NEW QUESTION 19
A retailer wants to add a wireless network to its stores to provide guest access. The store has wired POS systems which the customer will now replace with wireless systems.
What is one Important security action that the wireless solution supports to comply with PCI DSS?

Use test-practice, factory default settings for security settings and login credentials.

Implement TKIP encryption on the wireless network used by POS devices.

Impose mandatory clean up periods to delete records of user access to controllers

Enforce role-based access control on administrators who access controllers

NEW QUESTION 20
Refer to the exhibit.

A museum wants to add full S02.11ax wireless coverage across the building, which is about 210 feet (64 m) by 330 feet (100 m). The museum has 15-foot (4.6 m) ceilings and stone interior walls. The network needs to support up to 600 wireless guest devices The exhibit also shows a preliminary plan tor AP locations, me museum has eight Ethernet drops in the lobby and girt stop, but has otherwise not been wired.
What is one recommendation that the architect should make to ensure a successful deployment?

Add about 10 APs to achieve adequate density

Use directional antennas to avoid lost signal.

Use at least CATS cable to connect to the APs.

Add a wiring closet closer to the north side.

NEW QUESTION 21
For which scenario do Aruba CX 6300M Series switches meet the needs for an upgrade of the wired access layer while the Aruba CX 630QF Series switches do not?

The customer wants to utilize the Aruba AP-515 support for 002 3bz connectivity.

The customer wants to utilize LACP on AP515 in VSF switch configuration.

The Aruba CX6300M supports 10GBase-T connectivity with AP-515.

The Aruba CX 630DM support up to 75W PoE+ per port

NEW QUESTION 22
A customer has multiple medium and large branch sites, eacri of which requires between S ana 16 APs and supports between 200 and 600 wireless clients, Every branch site has an Internet connection, which it uses to reach the central data center. The customer would prefer the WAN links to be optimized in the solution.
Different use cases require SSID’s for tunneled traffic from remote sites to central location, traffic that must remain local on the remote site, and traffic which would need to egress out from remote site Internet connection.
Which branch office solution best meets the customer needs?

lAPs with Aruba central

RAPs and branch office controllers

IAPs with branch office controllers

CAPS and branch office controllers

NEW QUESTION 23
A customer has an existing Aruba wireless solution at their campus. This solution is shown in the exhibit.
The customer now wants to enhance seamless roaming and failover across the solution. The customer wants the least expensive solution that still meets the needs.
Which figure shows the correct changes to the solution to meet the new needs?
A)

B)

C)

D)

Option A

Option B

Option C

Option D

NEW QUESTION 24
Refer to the exhibit.

Exhibit: A49.01114316-102
The architect has determined that this building requires two 10GPE links to the data center.
What is the correct transceiver type for the links?

3FP+ LRM with mode conditioning

SFP+ SR

SFP+ LRM

SFP+ LR

NEW QUESTION 25
A retailer wants to add a wireless network to its stores to provide guest access. The store has wired POS systems which the customer will now replace with wireless systems.
The APs will he installed on the ceilings, which are about S feel (2.4 m) high.
What is one feature on the APs that can help the customer comply with PCI DSS?

Anomaly-based threat detection

Smart Rate ports

Physical security with Kensington Security Slots

User and Entity Behavior Analytics (UEBA)

NEW QUESTION 26
Refer to the exhibit.

A customer needs to create a proposal for a full wireless solution for a customer The customer has indicated that the MCs will connect to Aru&a CX Switches at the core and the APs will connect to PoE-i- switches at the edge. The customer requires that the wireless solution support at least 50 Mbps concurrently per AP. The architect has created a BOM tor a Mobility Master (MM), two MC 721os, and 400 AP-535S. me exhibit snows this BOM.
Which components has the architect forgotten?

SFP+ transceivers tor the MC connections

Smart Rate PoE+ injectors for the APs

Mounting Kits tor the MOs and MM

Sufficient Enterprise licenses for the APs on both MCs

NEW QUESTION 27
Refer to the exhibit.

The exhibit shows the current AP deployment in a school. This customer indicates that the current wireless performance is inadequate and w B02.11ax.
For the new’ solution, what should the network architect recommend?

APs deployed in rooms with a density-based design

APs deployed in similar locations, but with dual 5 GHz radios

APS deployed in similar locations, but with higher gain antennas

APs deployed in hallways with about twice the density

NEW QUESTION 28
Refer to the exhibit.

A customer requires a core switching solution for a very large multi-building campus with about 30;ooo wireless clients and devices. The network will have a flat topology as shown in the exhibit, and MCs will forward all wireless traffic to the core for routing.
The customer had considered Aruba 5400R Series switches, but the architect recommends Aruba S320 switches Instead.
How should the architect justify this recommendation?

The 8320 switches are required to eliminate the aggregation layer as the customer desires.

The 3320 switches offer more extensive mobility integration features with Aruba MCs and APs than the 54C0R Series switches do.

The 3320 switches support a higher density of 10GbE fiber ports than the 5400R Series.

The 8320 switches have greater performance and larger ARP tables than the 54Q0R Series, as is necessary for a network this size.

NEW QUESTION 29
Refer to the exhibit.

This warehouse has the dimensions shown in the exhibit. The warehouse is 20 feet (6 m) high up to a steel railing on the celling. The shelves are about 16 feet (5m) high, and they hold large containers filled with fluid and metal equipment.
The customer needs consistent wireless coverage throughout the warehouse, mostly to support the tablets that employees use to run Inventory tracking and other applications. The warehouse staff works in shifts of 20.
The architect has selected AP-515S. About how many APs should the architect propose?

about 13-16

about 23-32

about 6-8

about 6-4

NEW QUESTION 30
Refer to the exhibit.

A customer needs a wired upgrade for a building on its main campus. The exhibit shows the switches that the architect has selected for each closet and me existing cabling. The customer is not open to changing the cabling.
The customer requires link redundancy for the uplinks from each closet and for the links from the building to the core. In non link failure situations, the uplinks from each closet must support at least 20Gbps, and the building as a whole must have at least 20 Gbps to the core in non link failure situations Which two options Tor connecting the closets to the network core are valid? (select two.)

Connect me Floor 2 switch stack to Floor 1 with two fiber connections, DO me same for Floor 3. connect the Floor 1 switch stack to the network cone with two fiber connections.

Connect the switch stack on each floor directly to the network cone on two “fiber connections per floor. Achieve this by patching the inter-floor fiber through to the inter-building fiber.

Combine the nine switches on the three floors into a single switch stack with the MM QM3 fiber cables in a ring topology. Connect two Floor 1 members to the network core with one fiber connection each.

Combine the nine switches on all three floors into a single switch slack with stacking cables in a ring topology.
Connect two Floor f members to the network core with one fiber connection each

Add two aggregation switches in the Floor 1closet. Connect the switch stack for each closet to the aggregation switches on two fiber links each and the aggregation switches to the core on two fiber links.

NEW QUESTION 31
A retailer currently has two redundant ClearPass C2000 0L36O Gen9 hardware appliances and two perpetual 1K Access licenses. The customer uses ClearPass to authenticate employee wireless devices and other corporate wireless devices. ClearPass togs indicate that, peak license usage is currently 1900.
The customer now wants to add a guest access solution. Guests will connect to an open SSiD and be redirected to a portal which they can use to self-register and log in. The customer anticipates that up to f 550 guest devices will connect at the same time.
The customer requires the most cost-effective solution that will meet the requirements. What should the network architect recommend for this solution?

IK + 500 Access licenses: IK + 500 Guest licenses

1K + 500 Access licenses; Two 1K Onboard licenses

1K + 500 Access licenses

Two 1K Guest licenses

NEW QUESTION 32
What is one additional benefit trial Foundation Care gives beyond ire included warranty in Aruba products?

Next Business Day Snipping

unlimited 24×7 access to TAG and online support

business hour prone support for hardware issues

installation and getting started services

NEW QUESTION 33
Refer to the exhibit.

A customer needs a wired network upgrade and has complained about performance issues. The architect collected information about traffic now on several switch ports in different locations across the network, and the results are shown in the exhibit. Each of these ports is a 1Gbps port.
What can the architect conclude?

All of the ports show serious congestion

Port 1 shows periods of congestion; other ports are not congested.

Port 3 snows periods of congestion; other ports are not congested.

None of these ports show any periods of congestion

NEW QUESTION 34
A customer requires new MCs for a large multi-site network with about 600 AP-535S ana 30,000 wireless clients. The customer requires redundancy for the MCs, with each MC being able to handle the full toad in a failover situation The network should be able to sustain the loss of a controller with stateful failover within seconds. It should be able to undergo software upgrades without downtime.
The architect has recommended two 7240XM MCs. The customer points out that 7220 MCs can support their requirements and wonders why the architect recommended me 7240XMS.
What should the architect explain?

The 7240XM MCs have better redundant power supplies and fan tray component capabilities than 7220 MCs.

The 724QXM MCs can support full CPSec tunnels with this number of APs. while the 7220 MCs cannot.

The 7240XM MCS provide a higher number of concurrent GRE tunnels to support 600APs with MCS in L2 clustering.

The 7240XM MCs are required to support the large number of wireless clients in this network

NEW QUESTION 35
What is one reason to deploy an Aruba CX switch when compared to an ArubaOS switch?

to obtain API-enabled programmability for greater automation

to support Aruba Dynamic Segmentation

to obtain higher wattage power modules for enhanced PoE+ support

to support Zero Touch provisioning (ZTP)

NEW QUESTION 36
Which scenario Indicates the need for a wireless mesh?

A nsstorical building has some wired areas and a few areas with no wired or wireless connectivity, walls and ceilings have asbestos. The company needs wireless access across the site.

A hospital needs to provide high availability for wireless services in certain areas which support very critical wireless medical devices. Devices must always be in range of at least two APs.

A company has a small branch office with just one RAP. The company has noticed that performance is poor in some areas of the network and wants to add another AP.

A company needs to provide seamless roaming and wireless access between two buildings. The buildings are about 60 feet (18 m) apart.

NEW QUESTION 37
Refer to the exhibit.

A customer has the wined infrastructure shown in the exhibit. The customer is in the process of expanding their wireless services They will now add a new wireless solution, with mobility controllers (MCs) connected as shown. The new wireless solution will support a total of 450 APs and about 26,000 wireless devices. It must provide seamless roaming across the entire campus.
After the new deployment, both wired and wireless devices experience IP connectivity issues.
Which change to the existing infrastructure should the architect recommend to support all of the customer requirements?