H35-210_V2.5 relevant questions

8 Jan, 2026 By admin

H35-210_V2.5 Exam Study Guide Free Practice Test LAST UPDATED DATE Jan 08, 2026 [Q40-Q64]

H35-210_V2.5 Exam Study Guide Free Practice Test LAST UPDATED DATE Jan 08, 2026

The New H35-210_V2.5 2026 Updated Verified Study Guides & Best Courses

Q40. In GPON network, which of the following reasons may cause ONU to fail to go online?

The optical power received by the ONU is greater than the overload optical power.

The optical power received by the ONU is less than the sensitivity value

There is abnormal attenuation on the ODN line.

The ODN line is too long and exceeds the online distance set by the system.

Q41. Is the following description correct? The relationship between the transmission rate of ADSL and the transmission distance is: the longer the transmission distance, the greater the attenuation, the lower the transmission rate, and the relationship between the transmission distance and the attenuation is not linear.

True

False

Q42. In the GPON network, which one of the following descriptions is correct?

Different T-CONTs are identified by Port-ID

Different GEM-PORTs are identified by Alloc-ID

Different ONUs are identified by Port-ID

Different ONUs are identified by ONU ID

Q43. The routing table of a router contains the following two entries:
Destination/Mask Protocol Pre Cost Nexthop Interface
9.0.0.0/8 OSPF 10 50 1.1.1.1 Serial0
9.1.0.0/16 RIP 100 5 2.2.2.2 Ethernet0
If the router needs to forward packets with the destination address of 9.1.4.5, which of the following statements is correct?

The router selects the first route, because the priority of OSPF is higher.

The router selects the second route, because this route matches the destination address 9.1.4.5 more accurately.

The router selects the second route, because the metric of RIP is smaller.

The router selects the second route, because the outbound interface is Ethernet0, which is faster than Serial0.

When a router forwards packets, it selects the route with the longest prefix match (most specific route) for the destination address.
* First Route : Matches 9.0.0.0/8, which covers all IP addresses starting with 9.
* Second Route : Matches 9.1.0.0/16, which is more specific and covers IP addresses starting with 9.1.
For the destination address 9.1.4.5 , the second route (9.1.0.0/16) is a better match because it is more specific than the first route (9.0.0.0/8).
* Option A : Incorrect. OSPF has a higher priority, but the longest prefix match takes precedence over priority.
* Option B : Correct. The second route matches the destination address more accurately.
* Option C : Incorrect. Metric is not considered when comparing routes with different prefix lengths.
* Option D : Incorrect. Interface speed is irrelevant in route selection.
References:
* HCIA Huawei ACCESS Official Documentation , Chapter: IP Routing Table Selection.
* Routing Principles and Longest Prefix Match by Huawei.

Q44. Is the following description correct? The traffic-table on the OLT can not only set traffic speed limit parameters, but also support setting priority policies.

True

False

Q45. During DHCP packet forwarding, a DHCP relay agent modifies the corresponding fields in a DHCP packet to complete packet type conversion. Which of the following statements is correct?

The DHCP relay agent converts non-Ethernet packets into Ethernet packets.

The DHCP relay agent converts only broadcast packets into unicast packets.

The DHCP relay agent converts received broadcast packets into unicast packets, and vice versa.

The DHCP relay agent transparently transmits unicast packets without changing the packets.

* DHCP Relay Agent Functionality :
* A DHCP relay agent forwards DHCP packets between clients and servers located in different subnets.
* It modifies the packet headers to ensure proper delivery:
* Converts broadcast packets from clients into unicast packets to forward them to the DHCP server.
* Converts unicast responses from the DHCP server back into broadcast packets for delivery to clients.
* Why C?
* The DHCP relay agent performs bidirectional conversion between broadcast and unicast packets to facilitate communication between clients and servers in different subnets.
* Other Options :
* A : Incorrect because DHCP relay agents do not convert packet types (e.g., Ethernet vs. non- Ethernet).
* B : Incorrect because the relay agent handles both broadcast-to-unicast and unicast-to-broadcast conversions.
* D : Incorrect because the relay agent modifies unicast packets during forwarding.
Thus, the correct answer is C .
References:
* HCIA Huawei ACCESS Official Documentation , Chapter: DHCP Relay Agent.
* RFC 2131: DHCP Protocol Specification .

Q46. In the 802.1Q tag header, how many digits is the VLAN ID field, and how many VLANs can be specified in total?

4;16

8;256

10;1024

12;4096

Q47. Is the following description correct? ONT loading on MA5600T/MA5680T GPBC/GPBD is parallel on-board, and supports parallel loading of 256 ONTs at the same time.

True

False

Q48. Is the following description correct? Triple Play refers to the simultaneous provision of multiple different service access methods on one subscriber line.

True

False

Q49. When MA5600T is newly launched and connected to the network management system, which of the following descriptions are correct?

The interface IP address of the MA5600T used for management must be in the same network segment as the network management IP address

The configuration of the SNMP version should be the same as the configuration on the U2000 side

The configuration of read community name and write community name is the same as that on the network management side.

Add a static route, the destination address is the network segment where the network management IP is located

Q50. Configure ADSL profile parameters in UA5000, what measures can improve line stability?

Turn on the grid delete coding switch

The channel mode is selected as fast

Turn off the dynamic online adaptation function

Improve noise tolerance

Q51. Which method does BTV service use to send messages in the network?

Broadcast

Multicast

Unicast

Q52. In the GPON network, which of the following reasons may cause the ONT to fail to be automatically discovered?

The optical power received by the ONT is greater than the overload optical power.

The optical power received by the ONT is less than the sensitivity value

The ONT automatic discovery function of the GPON port is not enabled.

OLT upstream port is down

Q53. If the outband NMS is unreachable, which of the following operations can be performed? (Select All that Apply)

Check whether the IP address is set correctly.

Check the network cable.

The inband and outband NMS IP addresses cannot be in the same IP address segment.

Check whether the subnet number and NE number are set correctly.

* A/B: Basic network checks (IP configuration and physical connectivity).
* C: Inband and outband NMS IPs must be in different subnets to avoid conflicts.

Q54. command… What is the correct description of the three points in ./.profile?

The first point. Means execution, same as sh

The second point. Connected to the back /, ./ indicates the current directory

The third point. Connected to the previous /, which means the root directory

The third point. Before profile, the entire .profile is a file name, which means a hidden file

Q55. Is the following description correct? The access network upgrade loading file transfer can use FTP, TFTP, or SFTP, and FTP is recommended.

True

False

Q56. MA5600T supports multiple flow classification technologies. What flow classification technologies are currently supported?

Based on user-side VLAN

Based on the type of user-side service encapsulation

Based on VLAN + user-side message priority

Based on VLAN + user-side service encapsulation type

Q57. The OLT needs to classify the service flow before performing flow scheduling. Which of the following options are usually used as the means for MA5680T to perform traffic classification?

The cos field of 802.1P

Tos field of IP packet

DSCP field of IP packet

EXP field of MPLS packet

Q58. ADSL G.992.1 (G.dmt) is a technical specification that does not require a signal splitter.

TRUE

FALSE

Q59. What are the network side (uplink) interface types provided by MA5600?

STM-1

IMA

Q60. Is the following description correct? When the ONT is offline, the MA5600T/MA5680T can perform ONT PPPoE simulation test operations.

True

False

Q61. Which of the following statements about MIB is incorrect?

The MIB information of a device can be read using the MIB BROWSER tool.

MIB is an important part of the SNMP network management model.

The OID in a MIB is usually identified by a group of letters.

MIB is short for management information library.

OIDs (Object Identifiers) are numeric (e.g., 1.3.6.1.2.1.1.5), not letters. The statement in C is incorrect.

Q62. In the GPON network, which of the following statements is incorrect?

Each T-CONT is composed of one or more GEM Ports, and each GEM Port carries a service flow. A T-CONT can carry data streams of one or more types of services.

Each GEM Port is identified by a unique Port-ID. The Port-ID ranges from 0 to 4095 and is globally assigned by the OLT. That is, each ONU/ONT under the OLT cannot use GEMs with repeated Port-IDs. Port.

GEM Port identifies the service virtual channel between the OLT and ONU/ONT, that is, the channel that carries the service flow, similar to the VPI/VCI identification in the ATM virtual connection.

Each GPON port supports up to 32 ONU/ONT

Q63. Which of the following symbols are used to represent all terminals in the H.248 protocol?

“*”

“$”

“-“

“root”

Q64. Is the following description correct? MA5680T supports the function of traffic shaping on specific service-ports.

True

False

Loading …

Huawei H35-210_V2.5 (HCIA-Access V2.5) Certification Exam is an industry-recognized credential that validates the candidate’s ability to design, deploy, and manage access networks using Huawei’s technologies and solutions. HCIA-Access V2.5 certification exam covers a broad range of topics related to access network technologies and solutions, including WLAN, DHCP, AAA, and security technologies. The H35-210_V2.5 certification is a valuable credential for network engineers and professionals who work with access network technologies and solutions, and it is recognized globally as a testament to the candidate’s expertise in access network technologies and solutions.

Huawei H35-210_V2.5 certification exam is ideal for professionals who are involved in the design, implementation, and maintenance of access network solutions. H35-210_V2.5 exam is an essential certification for network engineers, network technicians, and network administrators who want to enhance their skills and knowledge in the field of access network technology. HCIA-Access V2.5 certification exam is recognized globally and provides an excellent opportunity for professionals to showcase their skills and knowledge to potential employers. Passing the Huawei H35-210_V2.5 certification exam will demonstrate a high level of expertise in access network technology, and it will help to advance the careers of professionals in this field.

Get Prepared for Your H35-210_V2.5 Exam With Actual 117 Questions: https://www.premiumvcedump.com/Huawei/valid-H35-210_V2.5-premium-vce-exam-dumps.html

Premium VCE Dumps

Premium VCE Dumps

H35-210_V2.5 Exam Study Guide Free Practice Test LAST UPDATED DATE Jan 08, 2026 [Q40-Q64]

Premium VCE Dumps

Premium VCE Dumps

Tag Archives: H35-210_V2.5 relevant questions

H35-210_V2.5 Exam Study Guide Free Practice Test LAST UPDATED DATE Jan 08, 2026 [Q40-Q64]