Nokia Archives - Premium VCE Dumps

15 Jul, 2024 By admin

4A0-114 Dumps for Pass Guaranteed – Pass 4A0-114 Exam 2024 [Q15-Q38]

4A0-114 Dumps for Pass Guaranteed – Pass 4A0-114 Exam 2024

4A0-114 Exam Dumps – Try Best 4A0-114 Exam Questions from Training Expert PremiumVCEDump

NEW QUESTION 15
Click the exhibit.

Routers RR1 and RR2 are route reflectors with the same Cluster-ID. How does router RA treat the updates for prefix 192.168.1.0/27 received from routers RR1 and RR2?

Router RA prefers the update received from router RR1.

Router RA prefers the update received from router RR2.

Router RA flags both updates as invalid.

Router RA accepts both updates and flags them as used.

NEW QUESTION 16
Which BGP message type is used to verify connectivity during and after BGP session establishment?

Hello

Update

Open

Keep-Alive

NEW QUESTION 17
What is the result of configuring the following policy statement as a BGP import policy on the Nokia 7750 SR?

All BGP routes are accepted.

All routes matching prefix lists “List-1” and “List-2” are rejected.

BGP routes matching prefix lists “List-1” or “List-2” are rejected.

BGP routes matching prefix lists “List-1” and “List-2” are rejected.

NEW QUESTION 18
Which of the following statements regarding BGP shortcuts is FALSE?

MPLS tunnels are used to carry transit traffic across the network.

A full mesh of iBGP peering sessions is not required,

Edge and transit routers need to be configured with BGP.

The transit routers need to support LDP or RSVP-TE LSPs.

NEW QUESTION 19
The configuration of an Nokia 7750 SR is given below. Router Rl has established BGP sessions with routers R2 and R3. Which of the following is TRUE?

Router R1forms an iBGP session with router R2, and an eBGP session with router R3.

Router R1forms iBGP sessions with routers R2 and R3.

Router R1forms eBGP sessions with routers R2 and R3.

The types of BGP sessions with routers R2 and R3 cannot be determined.

NEW QUESTION 20
An export policy is applied on a router to advertise a prefix to its eBGP peers. By default, which of the following updates are made to the route attributes?

LOCAL_PREFERENCE is set to 100.

NEXT_HOP is set to the neighbor router’s interface IP address.

The local AS number is added to AS_PATH.

COMMUNITY is set to the local AS number.

NEW QUESTION 21
What kind of BGP path attribute is AS_PATH?

Optional transitive

Optional non-transitive

Well-known discretionary

Well-known mandatory

NEW QUESTION 22
Given the network shown, which of the following is the correct BGP configuration for RR1?

NEW QUESTION 23
Click the exhibit.

Which of the following is a valid confederation configuration for Router R2?

Option A

Option B

Option C

Option D

NEW QUESTION 24
Which of the following statements about the MED BGP path attribute is FALSE?

The MED BGP path attribute is transitive.

The MED BGP path attribute is optional.

Routes having lower values in their MED BGP path attribute are preferred.

The MED BGP path attribute’s value is set by a router at the edge of an AS.

NEW QUESTION 25
A BGP router receives the following routes. Which route is selected as best route?
1: 192.169.20.0/24 with local preference 100, MED 150, AS Path 65300 65200 from an eBGP neighbor
2: 192.169.20.0/24 with local preference 100, MED 100, AS Path 63200 from an iBGP neighbor
3: 192.169.20.0/24 with local preference 200, MED 150, AS Path 65400 63200 from an iBGP neighbor
4: 192.169.20.0/24 with local preference 200, MED 100, AS Path 63700 from an eBGP neighbor

Route 1

Route 2

Route 3

Route 4

NEW QUESTION 26
Which of the following statements about BGP is FALSE?

BGP uses Hello messages to dynamically discover BGP peers.

To establish a BGP session, a TCP session must first be established between the two routers.

BGP uses the OPEN message to exchange capability parameters between routers.

BGP was originally designed as an exterior routing protocol.

NEW QUESTION 27
Which of the following regarding BGP Path Identifier is FALSE?

Path-ID is a four-octet identifier pre-pended to the NLRI field of a BGP update.

Path-ID is an optional transitive attribute used to advertise multiple paths.

Path-ID uniquely identifies each path advertised to a neighbor.

A BGP speaker that re-advertises a route must generate its own Path-ID.

NEW QUESTION 28
Which of the following is considered a best practice for BGP address planning?

Advertising external networks into IGP.

Using system addresses for setting up iBGP sessions.

Exporting the networks associated with the external links of eBGP peers into BGP.

Optimizing BGP route table by exporting IGP routes into BGP.

NEW QUESTION 29
Click the exhibit.

Assume all router-IDs are properly configured, and global IPv6 addresses are used to establish eBGP sessions.
Which of the following configurations is required on router A so that router B can exchange traffic with router D?

Option A

Option B

Option C

Option D

NEW QUESTION 30
In the diagram below, a data packet is sent from CE1 to a far-end CE2 over a VPRN service across multiple regions. Which of the following statements about the tunnel labels is FALSE?

The outer label is an RSVP, LDP, or segment routing label pushed by router Core1.

The second label is a BGP label pushed by router RBR1.

The service label is a label pushed by router PE1.

The outer label will be popped by router Core2.

NEW QUESTION 31
Routers PE1 and PE2 in the diagram exchange MP-BGP route updates that carry the route-target value associated with the EVPN service VPLS 300. What type of addressing information is included in those route updates?

VPN-IPv4

Label-IPv4

EVPN MAC

EVPN IP-Prefix

NEW QUESTION 32
Click the exhibit.

Router R1 is a route reflector with clients R2, R5 and R6. Prefixes advertised by router R5 have a local preference of 200. Router R3 advertises the prefix 192.168.1.0/27 to routers R5 and R6.
Assuming that none of the routers in AS 65540 is configured with “advertise-external”, what is the expected output of “show router bgp routes” on router R5?