NEW QUESTION 105
As shown in the figure, the MSR router in the headquarters is connected to the branch through the Ethernet interface E1/0, and the connection is backed up through the ISDN network. Which of the following options is the most reasonable and feasible at this time?

NEW QUESTION 106
In the network shown in the figure, the adjacency relationship between the routers is established normally, and there is no configured route leakage. Then RTA will forward the IP packet whose destination is 16.224.3.20 to ________.

NEW QUESTION 107
In the topology shown in the figure, the following configurations are performed on RTA, RTB, RTC and RTD respectively:
RTA-LoopBack0] ip address 1.1.1.1 255.255.255.255
RTA]ospf 1
RTA-ospf-1]area 1
RTA-ospf-1-area-0.0.0.1]network 10.0.0.0 0.0.0.255
RTA-ospf-1]import-route direct
RTB-LoopBack0] ip address 2.2.2.2 255.255.255.255
RTB]ospf 1
RTB-ospf-1]area 1
RTB-ospf-1-area-0.0.0.1]network 10.0.0.0 0.0.0.255
RTB-ospf-1-area-0.0.0.1]area 0
RTB-ospf-1-area-0.0.0.0]network 2.2.2.2 0.0.0.0
RTB-ospf-1-area-0.0.0.0]network 20.0.0.0 0.0.0.255
RTC-LoopBack0] ip address 3.3.3.3 255.255.255.255
RTC]ospf 1
RTC-ospf-1]area 0
RTC-ospf-1-area-0.0.0.0]network 20.0.0.0 0.0.0.255
RTC-ospf-1-area-0.0.0.0]area 2
RTC-ospf-1-area-0.0.0.2]nssa no-import-route no-summarRTC-ospf-1-area-0.0.0.2]network 30.0.0.0
0.0.0.255
RTC-ospf-1]import-route direct
RTD-LoopBack0] ip address 4.4.4.4 255.255.255.255
RTD]ospf 1
RTD-ospf-1]area 2
RTD-ospf-1-area-0.0.0.2]network 30.0.0.0 0.0.0.255
RTD-ospf-1-area-0.0.0.2]network 4.4.4.4 0.0.0.0
RTD-ospf-1-area-0.0.0.2]nssa
Then the _______ may not be injected into area 2

NEW QUESTION 108
In the following NSAP, the NET address that can be used as an integrated IS-IS is _______.

NEW QUESTION 109
The routers RTA and RTB are located in the same autonomous system. The BGP related configuration is as follows, then RTA and RTB are _____.
RTA]
bgp 100
timer keepalive 10 hold 30
peerRTB as-number 100
[RTB]
bgp 100
timer keepalive 30 hold 90
peerRTA as-number 100

NEW QUESTION 110
IS-IS periodically sends messages on P2P type links with ______.

NEW QUESTION 111
After the various routers in the figure have established IS-IS neighbor relationships, the routers that have sent CSNP messages have ______.

NEW QUESTION 112
Configure the silent interface on the router so that the router does not send OSPF protocol messages. The command is _______.

NEW QUESTION 113
In H3C equipment, the default priority value of OSPF internal routing is ________.

NEW QUESTION 114
In the topology shown in the figure, the following configurations are performed on RTA, RTB, RTC and RTD respectively:
RTA-LoopBack0] ip address 1.1.1.1 255.255.255.255
RTA]ospf 1
RTA-ospf-1]area 1
RTA-ospf-1-area-0.0.0.1]network 10.0.0.0 0.0.0.255
RTA-ospf-1]import-route direct
RTB-LoopBack0] ip address 2.2.2.2 255.255.255.255
RTB]ospf 1
RTB-ospf-1]area 1
RTB-ospf-1-area-0.0.0.1]network 10.0.0.0 0.0.0.255
RTB-ospf-1-area-0.0.0.1]area 0
RTB-ospf-1-area-0.0.0.0]network 2.2.2.2 0.0.0.0
RTB-ospf-1-area-0.0.0.0]network 20.0.0.0 0.0.0.255
RTC-LoopBack0] ip address 3.3.3.3 255.255.255.255
RTC]ospf 1
RTC-ospf-1]area 0
RTC-ospf-1-area-0.0.0.0]network 20.0.0.0 0.0.0.255
RTC-ospf-1-area-0.0.0.0]area 2
RTC-ospf-1-area-0.0.0.2]nssa default-route-advertise
RTC-ospf-1-area-0.0.0.2]network 30.0.0.0 0.0.0.255
RTC-ospf-1]import-route direct
RTD-LoopBack0] ip address 4.4.4.4 255.255.255.255
RTD]ospf 1
RTD-ospf-1]area 2
RTD-ospf-1-area-0.0.0.2]network 30.0.0.0 0.0.0.255
RTD-ospf-1-area-0.0.0.2]network 4.4.4.4 0.0.0.0
RTD-ospf-1-area-0.0.0.2]nssa
Then area 2 may not inject _____

NEW QUESTION 115
The role of IP Internal ReachabilitInformation CLV in IS-IS packets is ______.

NEW QUESTION 116
The topology of a certain network is complex, and there are multiple paths between the core and the branches. In order to control the routing between the core and the branch, effectively use bandwidth resources, and reduce maintenance costs, which of the following measures is the best?

NEW QUESTION 117
Perform the following configurations on RTA, RTB, and RTC in the topology shown in the figure:
RTA-GigabitEthernet0/0] ip address 192.168.2.1 255.255.255.0
RTA] ospf 1 router-id 1.1.1.1
RTA-ospf-1] area 1
RTA-ospf-1-area-0.0.0.1] network 192.168.2.0 0.0.0.255
RTB-GigabitEthernet0/0] ip address 192.168.2.2 255.255.255.0
RTB-GigabitEthernet0/1] ip address 192.168.3.1 255.255.255.0
RTB] ospf 1 router-id 2.2.2.2
RTB-ospf-1] area 1
RTB-ospf-1-area-0.0.0.1] network 192.168.2.0 0.0.0.255
RTB-ospf-1] area 0
RTB-ospf-1-area-0.0.0.0] network 192.168.3.0 0.0.0.255
RTB-ospf-1]import-route direct
RTC-GigabitEthernet0/0] ip address 192.168.3.2 255.255.255.0
RTC] ospf 1 router-id 3.3.3.3
RTC-ospf-1] area 0
RTC-ospf-1-area-0.0.0.0] network 192.168.3.0 0.0.0.255
Then the types of LSAs generated by RTB in the OSPF area are _______

NEW QUESTION 118
Which of the following address prefix lists matches the default route?

NEW QUESTION 119
Among the following types of LSA, the ones allowed in the backbone area are _________

NEW QUESTION 120
XZ company requires to build its network based on the modular enterprise network architecture. XZ has one R&D base in Shenzhen and Xi’an each; one office building in Beijing and Shanghai each; offices with more than 50 people in 23 capital cities; small offices with no more than 8 people in 200 small and medium-sized cities; There are usually more than 200 market and technical personnel on business trips at any given time. XZ Company strictly prohibits employees from using the company network to access websites that are not related to work. According to these circumstances, the network module XZ company should have is ________.