GB0-342-ENU Archives - Premium VCE Dumps

9 Mar, 2023 By admin

Latest GB0-342-ENU Study Guides 2023 – With Test Engine PDF [Q81-Q98]

Latest GB0-342-ENU Study Guides 2023 – With Test Engine PDF

Get New GB0-342-ENU Practice Test Questions Answers

QUESTION 81
The following statement is correct

When covering multiple floors, the channel setting should consider the signal interference in the three-dimensional space.

The user isolation function can reduce the impact of broadcast packets and user traffic on the network, and also avoid some ARP attacks, making the wireless network stable and safe to use.

WLAN dual-band combiner is used for capacity expansion, which is fast in implementation and low in cost. It can quickly double the number of access users in hotspot areas, and can easily deploy functions such as load balancing.

WLAN and PHS have similar frequency bands and air attenuation. When the power of the equipment is the same, the coverage is similar, which provides favorable conditions for the co-site construction of WLAN and PHS.

QUESTION 82
The wireless client for the Microsoft operating system is already part of the service, in XP its name is

Wireless Zero Configuration

Wireless STA Configuration

Microsoft Wireless Zero Configuration

Microsoft Wireless STA Configuration

QUESTION 83
Moduduyi is far from the required working frequency band, and the closer its passband frequency is to the working frequency of the wireless system, the better, and there is no redundant passband, which can ensure the best effect; secondly, a combiner with filtering function must be used , the interval between the ports should be greater than 80dB, and the maximum

correct

error

QUESTION 84
In the wireless networking using controller WX5002 and AP WA2110, which command needs to be configured first if 802.1X authentication is required for wireless users?

dot1x authentication-method pap

port-security enable

port-security authorization ignore

port-security tx-key-type 11key

QUESTION 85
What are the advantages of wireless network over wired network ( )

High flexibility

High reliability

Strong scalability

High Security

QUESTION 86
When logging into the FATAP management interface through the WEB interface, what is the correct default username and password?

admin/h3cadmin

h3c/h3c

admin/admin

admin/h3capadmin

QUESTION 87
Which of the following statements about AP equipment grounding specifications is correct?

The indoor AP should be grounded. The outdoor AP, antenna and lightning protection device, and PoE module must be grounded. The grounding resistance should be less than 5 ohms. The grounding wire should not exceed 30 meters.

When the multi-strand ground wire (generally not single-core) is connected to the ground bar, a ground terminal (copper nose) must be installed. The size of the ground terminal should be consistent with the wire diameter, and the pressure (welding) connection should be firm.

The contact part between the ground terminal and the ground bar should be flat and tight, without rust and oxidation, and should be coated with Vaseline or butter to prevent rust when connecting different materials.

The principle of fixing the ground wire of the PVC pipe is the same as that of the RF wire. When installing wire grooves, the fixed spacing of wire grooves is 0.3 meters. The radius of curvature of the ground wire should be greater than 130mm.

QUESTION 88
Which description is correct about WIPS for wireless intrusion detection?

Antenna EIPS (WIPS) can detect potential safety hazards in time and provide early warning of safety strategies by scanning communication and collecting airborne information.

The AP with WIPS function enabled can not only provide wireless service, but also perform detection and scanning

WIPS function can attack illegal AP or station

The WIPS function can detect the flood attack of 802.11 antenna packets, and can automatically add to the blacklist after detection

QUESTION 89
The H3C wireless controller can use the command “display wlan ap all verbose” to view the detailed information of AP registration. The following output is the detailed information of an AP viewed through this command.

From the above information, it can be known that _

The model of this AP is WA2100-AG, the status is RUN (registered successfully), and the IP address is 192.168.0.125

This AP has been registered and online for 42 minutes and 50 seconds. It can be judged whether this AP has been disconnected according to the running time of the wireless controller.

Last Join Address Indicates the IP address used by the AP when it successfully established a link with the AC last time. When the AP is disconnected, you can try to telnet to the AP through this address

Admin State is DOWN, indicating that the AP’s radio may be in the disabled state

There are currently no users on this AP because the Running Clients Count is 0

QUESTION 90
The correct procedure to configure the radio 1 channel of AP1 to 6 in the H3C wireless controller is

[H3C] wlan ap ap1 [H3C-wlan-ap-ap1] radio 1 [H3C-wlan-ap-ap1-radio-1] channel 6

[H3C] wlan ap ap1 [H3C-wlan-ap-ap1] radio 1 channel 6

[H3C] wlan ap ap1 radio 1 channel 6

[H3C] wlan ap ap1 radio 1 [H3C-wlan-ap-ap1-radio-1] channel 6

QUESTION 91
Which of the following are the survey elements of interest

Number of users in the area requiring wireless access and bandwidth requirements

The location area where AP devices can be installed and the installation method used

Coverage area shape, distance and area

Subdivision, material and thickness of obstacles in the coverage area

QUESTION 92
Which of the following descriptions about 802.11g WLAN devices is correct

802.11g devices are compatible with 802.11a devices

802.11g devices are compatible with 802.11b devices

The modulation mode of 802.11g 54Mbps is the same as that of 802.11a 54Mbps, both of which use OFDM technology

802.11g provides the same maximum speed as 802.11b

QUESTION 93
The IRF incense stacking networking methods supported by the wireless controller include ____.

IRF on the same frame as the business board

Dual cross-exchange IRF

Dual Direct IRF

Service board cross-frame IRF

QUESTION 94
Which of the following belong to H3C’s optimization technology innovation based on WLAN service application?

Wireless Service Fair Queue Scheduling Mechanism

Wireless user data rate limit

Isolation of Layer 2 service traffic for wireless users

Suppresses the impact of weak signal clients on network performance

QUESTION 95
The correct description about the CAPWAP protocol is ____.

Centralized configuration delivery, user access management and roaming management of the AC to FITAP.

CAPWAP uses UDP client/server model communication between FITAP and AC.

CAPWAP defines the data encapsulation and transmission mechanism between AC and FITAP.

H3C’s AC listening port number: 5247 (data tunnel), 5246 (control tunnel).

QUESTION 96
Good grounding is also an important means to ensure the normal operation of communication equipment.

Reduce the noise interference of communication equipment and ensure good communication effect

To ensure the stable operation of the electronic components of the communication equipment

Ensure that electronic components in communication equipment are protected from electrostatic high voltage, transient discharge pulses, etc.

Make the communication equipment obtain a good shielding effect and avoid the external electromagnetic interference

QUESTION 97
Which of the following statements about antenna gain is correct?

The selection of the antenna should meet the requirements of the coverage scenario, not the bigger the gain, the better

The higher the gain of the antenna, the better, using the antenna with large gain can obtain greater transmit power

The higher the gain of the antenna, the higher the degree of signal convergence

The larger the antenna gain, the smaller the coverage angle

QUESTION 98
(Single Choice) The following technologies are not specific to the 802.11ax protocol.

802.11ax supports both uplink and downlink MU-MIMO.

802.11ax modulation mode supports 1024QAM.

Supports 8-channel bonding with 160MHz bandwidth.

802.11ax introduces BSS-COLOR to quickly identify BSS and improve signal reception and demodulation efficiency.

GB0-342-ENU Dumps and Exam Test Engine: https://www.premiumvcedump.com/H3C/valid-GB0-342-ENU-premium-vce-exam-dumps.html

Premium VCE Dumps

Premium VCE Dumps

Category Archives: GB0-342-ENU

Latest GB0-342-ENU Study Guides 2023 – With Test Engine PDF [Q81-Q98]