Q37. What is a benefit of SmartFabric Services Mode?

Q38. When a SAS IOM is power cycled, how much time does it take for the storage-IOM to display mapping information?

Q39. In addition to one compute sled, one management module, and one IOM, what is the minimum required HW configuration on the PowerEdge MX7000 to POST?

Q40. A PowerEdge MX7000 administrator is tasked to perform a chassis update using a catalog.
Which source options are used to create the catalog?

Q41. When running an Open Networking operating system, which IOM functions are provided through OME-M?

Q42. An administrator has been tasked with specifying hardware for a deployment having the following requirements:
4 node cluster within a single MX7000 chassis
Each node needs a minimum of 6x 2.5″ drives
3 TB of memory and 64 physical CPU cores per node
What is the maximum hardware configuration that meets the requirements?

Q43. What does OBPAR allow on a PowerEdge MX750c?

Q44. Which ports will be active in an MX9116n FSE if there are dual-port NICs in all the server sleds?

Q45. A technician replaces a failed Management Module in an MX7000 chassis group. After the technician leaves the site, the administrator reports that the lead chassis is no longer able to communicate with its members.
How can OME-M be used to confirm the cabling configuration?

Q46. A system administrator must interface the compute sleds of an MX7000 chassis to a Z9432F-ON in a single SmartFabric.
Which FEM IOM is required?

Q47. Where in the OME-M Web interface can the Chassis Deployment Wizard be found?

Q48. Which three components are required in an MX7000 chassis to allow multiple compute sleds to share access to the same disks in an MX5016s enclosure?
(Select 3)

Q49. A server administrator wants to configure chassis power, thermal, and fans metric reports on a PowerEdge MX7000 chassis.
Which type of license is required?

Q50. What is the maximum number of mezzanine cards that can be installed in an MX840c?

Q51. A server administrator is deploying a VMware vSphere cluster and configuring High Availability on a PowerEdge MX7000 modular system.
Which configuration is required?

Q52. Which MX7000 component is responsible for Fabric Consistency Check?

Q53. What configuration is supported for a fully populated MX740c compute sled?

Q54. While servicing an MX7000 chassis a system administrator logs into OME-M and receives a Chassis Mismatch error.
What should be the next step taken by the administrator?

Q55. Which two main components comprise a Scalable Fabric?