Q219. Drag and drop the correct address space on the left to the lPv6 multicast feature or protocol on the right.

Q220. Refer to the exhibit.

With which metric was the route to host 172.16.0.202 learned?

Q221. Which configuration ensures that the switch is always the root for VLAN 750?

Q222. A frame that enters a switch fails the Frame Check Sequence. Which two interface counters are incremented?
(Choose two)

Q223. Refer to the exhibit.

Which type of configuration is represented in the output?

Q224. Which command should you enter to configure a single port to bypass the spanning-tree Forward and Delay timers?

Q225. Drag and drop the functions from the left onto the correct network components on the right

Q226. Refer to the exhibit. After you apply the given configuration to arouter, the DHCP clients behind the device connot communicate with hosts outside of their subnet.
Which action is most likely to correct the problem?

Q227. Refer to Exhibit.

The loopback1 interface of the Atlanta router must reach the loopback3 interface of the Washington router.
Which two static host routes must be configured on the NEW York router? (Choose two)

Q228. What is a function of Wireless LAN Controller?

Q229. Drag drop the descriptions from the left onto the correct configuration-management technologies on the right.

Q230. Refer to the exhibit.

An engineer deploys a topology in which R1 obtains its IP configuration from DHCP. If the switch and DHCP server configurations are complete and correct. Which two sets of commands must be configured on R1 and R2 to complete the task? (Choose two)

Q231. An OSPF neighbor adjacency is not formed between R3 in the main office and R5 in the Branch2 office.
What is causing the problem?

Q232. Which two actions influence the EIGRP route selection process? (Choose two)

Q233. which type of IPv6 address is publicly routable in the same way as IPv4 public address?

Q234. Which three statements about Syslog utilization are true? (Choose three.)

Q235. Drag and drop the network protocols from the left onto the correct transport services on the right.

Q236. An engineer is configuring NAT to translate the source subnet of 10.10.0.0/24 to any one of three addresses:
192.168.3.1, 192.168.3.2, or 192.168.3.3. Which configuration should be used?

Q237. How does STP prevent forwarding loops at OSI Layer 2?

Q238. Which two conditions must be met before SSH can operate normally on a Cisco IOS switch? (Choose two.)

Q239. Which type of traffic Is sent with pure iPsec?

Q240. Drag the IPv6 DNS record types from the left onto the description on the right.

https://ns1.com/resources/dns-types-records-servers-and-queries#:~:text=Address%20Mapping%20record%20(A%20Record,a%20hostname%20to%20another%20hostname.

Q241. What are two benefits of Private IPv4 Addresses? (Choose two.)