New (2022) Download free H35-211_V2.5 PDF for Huawei Practice Tests [Q19-Q34]

31 Dec, 2022 By admin H35-211_V2.5, Huawei 0 Comments

New (2022) Download free H35-211_V2.5 PDF for Huawei Practice Tests [Q19-Q34]

Rate this post

New (2022) Download free H35-211_V2.5 PDF for Huawei Practice Tests

100% Free H35-211_V2.5 Files For passing the exam Quickly

NEW QUESTION 19
When the Type C dual home protection linkage uplink detection, if the OLT or OLT uplink fails, the Type C
dual home protection can be reversed to another OLT

True

False

NEW QUESTION 20
(Radio) The following options, regarding the description of the H.248 connection model, are correct?

The connection model cannot be modified during a user session

When the session between the two users ends, the corresponding association is used

A media gateway that supports only point-to-point connections can allow three or more endpoints to
exist in the –association at the same time

When the user call is successful, the empty connection starts to be created

NEW QUESTION 21
When configuring IPTV services on the U2000, what templates are included in the IGMP templates?

Permission templates

Multicast user templates

Program templates

Preview the parameter template

NEW QUESTION 22
The maximum spectroscopic ratio supported by 10G EPON is?

1: 256 (Laboratory).

1:32

1:128

1:64

NEW QUESTION 23
(Radio) When the invitation message sent by user A reaches user B after passing through server C, D, E, the
message received by user B is VIA. The server address of the field information record is in descending order.

C->D->E

E->C->D

E->D->C

C-E->D

NEW QUESTION 24
(Single choice) The following statement about the PITP protocol is incorrect

The PITP protocol includes pitp P mode and PITP V mode

The purpose of the PITP feature is to provide the upper authentication server with the physical location
information of the access user, and the BRAS device can realize the user account and the press position
after obtaining the user access location information

Bind the authentication of the information to avoid the theft and roaming of the user account

In pitp V mode, the user’s physical location information is added to the PPPOE message sent by the user
side to cooperate with the upper-level server for user authentication

PITP P mode can also be called PPOE+ mode

NEW QUESTION 25
(Radio) 10G GPON system downlink wavelength is

1310nm

1577nm

1270mm

1490nm

NEW QUESTION 26
When ont fails or the hardware needs to be replaced, the ONT service needs to be replaced, and then the ONT
service needs to be removed on the OLT, and then the new ONT service needs to be registered

wrong

Right

NEW QUESTION 27
(Multi-select) Use 0TDR to locate the abnormally attenuated location in the optical path, and after the OTDR
is connected to the detected line, which of the following parameters can be set.

Set the measurement range

Set the wavelength

Set the mode

Sets the pulse width

NEW QUESTION 28
(Multi-select) VLAN planning principles need to be considered

The total number of VLANs

Customer type and number of users

Type and type of business

Uplink networking mode

The networking topology of the OLT

NEW QUESTION 29
(Radio) The following is not the QOS service model, is

Diffserv

Intserv

FIFO service

Best Effort

NEW QUESTION 30
Multicast technology effectively solves the problem of single-point transmission and multipoint reception, and
realizes efficient data transmission from midpoint to multipoint in IP network.

wrong

Right

NEW QUESTION 31
In esight’s OnT zero configuration deployment, do not provision OLT when incrementally configuring OLT.

True

False

NEW QUESTION 32
Type B protection provides redundant protection for both OLT PON ports and backbone fibers when OLT or
OLT PON If the port or trunk fiber fails, manually switch to another – luguang.

True

False

NEW QUESTION 33
(Radio) Which of the following options can improve the service experience of multicast users when switching
channels (switching time is shorter)

When adding a multicast program, the prejoin feature is disabled

Enables the Quick Leave feature when adding a multicast user

When you add a multicast user, enable the preview feature

Use group addresses with small values

NEW QUESTION 34
(Multiple select) When there is a backbone fiber break or OLT does not detect the expected optical signal
(L0S) alarm, the possible cause is that

Rogue ONU exists under the port

The port backbone fiber is faulty

Any power loss or failure under the port

The port laser is turned off

Loading …