[Q18-Q33] Latest HQT-4180 Practice Test Questions Verified Answers As Experienced in the Actual Test!

1 Nov, 2026 By admin HQT-4180, Hitachi 0 Comments

[Q18-Q33] Latest HQT-4180 Practice Test Questions Verified Answers As Experienced in the Actual Test!

Rate this post

Latest HQT-4180 Practice Test Questions Verified Answers As Experienced in the Actual Test!

Pass Hitachi HQT-4180 Exam in First Attempt Easily

Hitachi HQT-4180 Exam Syllabus Topics:

Section	Objectives
Pre-installation & Installation	– Pre-installation checks – Hardware installation procedures – System configuration and validation
Maintenance & Troubleshooting	– Incident resolution procedures – Performance monitoring and diagnostics – Hardware replacement and upgrades
System Architecture & Components	– Core storage architecture concepts – VSP Midrange system models and specifications
Configuration & Management	– Storage pool and parity group configuration – Management tools (e.g., SVP, Ops Center)

Q18. From which two locations can the Maintenance Utility be invoked on a VSP One B26? (Choose two.)

VSP One Block Administrator

Hitachi Remote Ops Monitor Agent

SVP Web Console

MPC connected to the Maintenance LAN port on the array

Q19. You need to upgrade the firmware on a VSP G700.
Which file must you select to perform the upgrade using the Maintenance Utility?

All Firmware.mda

HA-MPC-xx.iso

HA-SVP-xx.iso

setup.exe

Q20. A customer wants to change a production RAID Group from RAID 5 (7D+1P) to RAID 6 (6D + 2P) on a VSP G700 during normal operations. They have just unmapped the LUNs from the channel ports.
What needs to be performed next?

The RAID level must be changed in Storage Navigator.

The RAID level must be changed in the SVP Maintenance window.

The RAID 5 Group must be put into DRU mode in Storage Navigator.

The RAID Group must be deleted.

Q21. You are installing a VSP F370 and you need to connect your laptop to one of the controllers.
What are the two default IP addresses of the maintenance ports of CTL1 and CTL2? (Choose two.)

10.0.0.17

10.0.0.16

192.168.0.17

192.168.0.16

Q22. Which two statements are correct when adding cache to a VSP E590? (Choose two.)

Cache modules must be installed in CMG1.

Cache Modules must be installed on the CM board.

CMG0 and CMG1 must have the same DIMM type.

This is not supported online.

Q23. 33. A customer wants to remove a VSP G350 from production and virtualize it behind a VSP
5600 in a separate test environment. You inform the customer that as part of the move, it is faster to perform a new installation procedure of the entire VSP G350 system.
How is this accomplished?

This can be done from HSAE in Maintenance Mode

This can be done using the SVP Webconsole

This can only be performed by a Hitachi service representative using the Maintenance Utility

This must be performed by a Hitachi service representative or authorized partner using the MPC

Q24. A customer has a VSP E1090 with four attached NVMe drive boxes (DBNs).
How many back-end cables are used?

Q25. Which two reconfiguration activities are performed without interrupting host access on a VSP Gx00 system? (Choose two.)

adding a DKB

adding a DB60 drive tray

upgrading from G200 to G800

upgrading from G200 to G600

Q26. The SVP of a VSP G900 system failed and you have been asked to replace it. Which two items must be available to perform the replacement? (Choose two.)

the iso file with the correct version of Hitachi Ops Center

the iso file with the correct version of the Windows operating system

the microcode iso file with the correct software versions

the Hitachi Remote Ops Monitor Agent iso file

Q27. Your customer wants to connect multiple servers to a new port on a VSP G700. The correct topology has already been set for the port.
What should you do next?

Enable Port Security.

Enable Host Group security.

Create a Host Group.

Scan for all WWNs.

Q28. Which three RAID configurations are supported by VSP Midrange systems? (Choose three.)

2D + 2D

4D + 1P

7D + 1P

8D + 1P

10D + 2P

Q29. A drive in a 3D + 1P RAID group fails in a VSP G700 and there is no spare drive available.
Which two actions are automatically performed by the system? (Choose two.)

An alert is generated.

Dynamic Sparing is started.

The Correction Copy process starts.

The RAID group is placed in Correction Access.

Q30. Which tool is used for the remote monitoring of a VSP N800 system?

Hitachi Remote Ops SVP Agent

Hitachi Remote Ops Monitor Agent

MPC Software

Hitachi Performance Monitor

Q31. What are two requirements for SVP connectivity on a VSP midrange system? (Choose two.)

one Ethernet connection to the customer’s network

one iSCSI connection from each controller to different LAN ports on the SVP

at least one 1000BASE-SX optical connection to the customer’s network

a static IP address for the SVP on the same network segment as the storage system

Q32. A customer wants to upgrade a VSP G700 to 512 GB RAM capacity.
What is the valid CFM configuration?

two BM35 per controller

two BM45 per controller

one BM45 per controller

two BM35 per system

Q33. A customer wants to upgrade their VSP E790 with a SAS Expansion feature. What are three requirements? (Choose three.)

Two additional Disk Boards (DKBs) have to be installed.

Slots B of both controllers must be available for DKB installation.

The SAS Expansion license has to be installed.

In Shared Memory, the Extension1 has to be enabled.

Drive Boxes (DBs) with SAS interface have to be added.

The VSP E790/E590 is a 2U single-chassis storage system with an internal drive enclosure for up to 24 NVMe SSDs.
The maximum supported capacity for a single NVMe SSD is 30TB, so up to 720TB can be installed in the system.
Depending on the RAID level and the number of spares configured, the usable capacity may be less.
The SAS Expansion feature provides the customer with flexibility in terms of capacity and tiering.
Based on two SAS Disk Boards (DKBs) mounted in Slot B of both controllers, certain numbers of external SAS Drive Boxes can be added.
Drive Boxes are offered for 3.5″ NL-SAS drives and for 2.5″ SAS HDDs and SSDs.

Loading …

We offers you the latest free online HQT-4180 dumps to practice: https://www.premiumvcedump.com/Hitachi/valid-HQT-4180-premium-vce-exam-dumps.html

Premium VCE Dumps

Premium VCE Dumps

[Q18-Q33] Latest HQT-4180 Practice Test Questions Verified Answers As Experienced in the Actual Test!

Hitachi HQT-4180 Exam Syllabus Topics:

Leave a Reply Cancel reply