Prepare For Realistic 1z0-1091-22 Dumps PDF - 100% Passing Guarantee [Q29-Q43]

13 Jan, 2024 By admin 1z0-1091-22, Oracle 0 Comments

Prepare For Realistic 1z0-1091-22 Dumps PDF – 100% Passing Guarantee [Q29-Q43]

Rate this post

Prepare For Realistic 1z0-1091-22 Dumps PDF – 100% Passing Guarantee

Check the Available 1z0-1091-22 Exam Dumps with 53 Q’s

Oracle 1z0-1091-22 exam is designed to assess the candidate’s skills and knowledge in various areas related to the implementation of the Oracle Utilities Meter Solution Cloud Service. These areas include configuring the platform, installing and configuring the necessary software, and troubleshooting common issues that may arise during implementation. Candidates should also be familiar with the different features of the platform and how to leverage them to improve their organization’s meter data management processes.

QUESTION 29
The interval proxy day estimation Validation, Estimation, and Editing (VEE) rule estimates missing intervals by selecting interval data to average from a list of days that are most like the day being estimated. This is achieved by measuring the component comparison periods.
What is used to define the proxy?

Like premise

Weather data

Neighbor

Customer class profile

QUESTION 30
Which THREE are derived values?

Value with a factor such as line loss applied.

Value converted from one unit of measurement to another.

Estimated value if the final measurement is too low or high.

Interval data values created by “intervalizing” a scalar reading by applying a profile to it.

Comparison of normal versus actual usage.

QUESTION 31
You want to manage additional Landis + Gyr device events that are not covered by the set of standard device event types provided with Smart Grid Gateway (SGG).
Apart from creating the new device event type “admin data”, what else should you do to represent the new standard device events that you want to manage?

Set up service providers for each new device event that you want to manage, and specify on each service provider the standard device evert to which it maps.

Create a set of admin data to represent the Landis + Gyr specific device event types, ensuring that for each new device event type, the name of the corresponding standard device event business object is configured in the “Standard Device Event BO Map” characteristic.

Add a record into the External Device Event Mapping table (Dl-E>ODVCEVNTMAP) for each new device event that you want to manage, specifying the standard device event to which it maps.

Extend the Landis + Gyr device event mapping extendable lookup such that it maps each of the Landis
-f- Gyr specific device event names to the new standard device event names.

QUESTION 32
Which THREE commands are supported by the Smart Grid Gateway (SGG) adapters?

Request outage information

On-demand reading

Ping meter

Connect

Disconnect service at pole

QUESTION 33
A business needs a new Service Order process that includes meter commands. Which THREE options should you configure to build this process?

Measuring component type

Device configuration type

Activity type

Communication type Message sender

QUESTION 34
A customer is starting an Advanced Meter Infrastructure (AMI) roll-out initiative and they plan to replace their legacy scalar time-of-use (TOU) meters with smart meters. They want customer information system (CIS) to continue to bill for the same TOU periods and they do not want to change the CIS rates.
In which THREE ways can you configure Meter Data Management (MDM) to support this requirement?

Write a custom algorithm to determine the proper rate.

Add an extendable lookup value containing the new device configuration type and the new usage calculation group.

Add the TOU mapping rule to the existing usage calculation group.

Add a new usage calculation group with a TOU mapping rule.

Set up the new usage calculation group to be identified dynamically by plug-in logic supplied on the usage subscription’s type.

QUESTION 35
Which statement is true about usage transaction?

It is created by an external source or Meter Data Management (MDM), which uses the usage calculation engine to generate usage values.

It is created by an external source or MDM, which uses the usage calculation engine to generate a final value. Valuation, Estimation, and Editing (VEE) can be configured but when called in real time, usage transaction may not be saved.

It must be created by an external system and it must be stored in the database.

It is created by an external source or MDM, which uses the usage calculation engine to generate a final value. VEE can be configured and usage transaction is saved.

QUESTION 36
For a Meter Data Management (MDM) implementation, a customer requires specific bill determinants along with bill determinant calculation validations to be executed, before the determinant values are exported to their customer information system (CIS).
Which THREE factors should you consider while configuring usage calculation groups?

CIS rates, that MDM bill determinants or the usage process are expected to support

Bill determinants or usage validations

Bill determinants or usage calculations

Type of measurement (interval or scalar) data that needs to be used for bill determinants or usage calculation

Device subscriptions

QUESTION 37
A customer is starting an Advanced Meter Infrastructure (AMI) roll-out initiative and plans to use Meter Data Management (MDM). The AMI meters will record the consumption reading every 15 minutes through the day and a single register read at the end of the day. They plan to use this data for billing, load research, and presentment via their customer web portal.
What is the minimum number of measuring component types the customer needs to create in MDM?

A single measuring component type to store AMI data (15-minute interval reading along with the daily scalar register reading) for each case purpose, far example: billing, load research, and customer web portal.

A single measuring component type to store the 15-minute interval readings and another measuring component type for the daily scalar register reading.

A single measuring component type to store the 15-minute interval readings, and another measuring component type for the daily scalar register reading for each use case purpose, for example: billing, load research, and customer web portal.

A single measuring component type to store the 15-minute interval readings along with the daily scalar register reading.

QUESTION 38
A time-of-use (TOU) template’s interval size controls the values allowed as start and end times. A template can be used to generate TOU data for TOU maps whose seconds per interval (SPI) is divisible by the template’s SPI.
For what can you use a 60-minute template?

To only generate TOU data for 30-minute TOU maps.

To generate TOU data for 6G-, 15-, and 5-minute TOU maps.

To generate TOU data for 120-minute TOU maps.

To only generate TOU data for minute TOU maps.

To generate TOU data for 120-minute and 1440-minute TOU maps.

QUESTION 39
What are the THREE uses of the Smart Grid Gateway (SGG)?

Sharing event information with downstream systems

Sharing customer information

Connecting to Smart Meter systems

Communicating directly with meters

Sharing outage information with outage management systems

QUESTION 40
Which THREE are best practices for measurement retention?

Derive time-of-use (TOU) values with interval data to prevent storing extra data.

Derive demand from interval data to prevent storing extra data.

Keep scalar measurements in the customer read tables to stay consistent.

Use Information Lifecycle Management (ILM) processes to help archive data.

Keep initial measurement data (IMD) for the same period of time as final measurements for cancel rebill purposes.

Explanation
Some of the best practices for measurement retention are:
* Derive time-of-use (TOU) values with interval data to prevent storing extra data: Time-of-use (TOU) values are scalar values that are calculated from interval data based on different TOU periods. Interval data is measurement data that is recorded at regular intervals, such as every 15 minutes or every hour.
To prevent storing extra data, you can derive TOU values with interval data instead of storing them separately.
* Derive demand from interval data to prevent storing extra data: Demand is a value that indicates the maximum power or load that is consumed or generated during a certain period. Demand can be calculated from interval data by using certain methods, such as block demand or rolling demand. To prevent storing extra data, you can derive demand from interval data instead of storing them separately.
* Use Information Lifecycle Management (ILM) processes to help archive data: Information Lifecycle Management (ILM) processes are features that enable MDM to manage the lifecycle of measurement data based on certain policies or rules. ILM processes can help archive data that is no longer needed or used by moving them to different storage tiers or deleting them.
You do not need to keep scalar measurements in the customer read tables to stay consistent, which are tables that store measurement data that is entered by customers or meter readers. Scalar measurements are measurement data that are recorded at certain events, such as billing cycle end or meter exchange. You can store scalar measurements in different tables based on their source or status.
You do not need to keep initial measurement data (IMD) for the same period of time as final measurements for cancel rebill purposes, which are records that store the raw measurement data that is received from smart meter systems or other sources. Final measurements are records that store the measurement data that has been validated, edited, and estimated. You can keep IMD for a shorter period of time than final measurements based on your business needs or requirements.

QUESTION 41
In SaaS, which THREE configuration steps would you perform to convert natural gas volume to energy at the measuring component level?

Create value identifiers far the energy Unit of Measure (UOM) on the device.

Set up a factor to hold the conversion values.

Configure a value derivation algorithm by using Groovy.

Create value identifiers far the energy UOM on the measuring component type.

Configure a value derivation algorithm by using Java.

QUESTION 42
Why would you use an eligibility criteria in usage subscription?

To configure an optional usage calculation rule within a usage calculation group for the usage.

To configure an optional validation group within a usage subscription.

To determine whether a usage subscription generates a usage transaction.

To configure an optional usage group within a usage subscription.

QUESTION 43
Initial measurement data (IMD) is imported into Meter Data Management (MDM) and can be viewed through the Measuring Component portal, but is not in the “Final” measurement status.
What has the IMD passed in this case?

Critical validation

Multiplier check validation

Critical validation, high/low check validation, and sum check validation

High/low check validation

Sum check validation

Oracle 1z0-1091-22 exam is designed for professionals who want to become certified in implementing Oracle Utilities Meter Solution Cloud Service 2022. Oracle Utilities Meter Solution Cloud Service 2022 Implementation Professional certification is suitable for professionals who are responsible for implementing and configuring Oracle Utilities Meter Solution Cloud Service in various industries, including utilities, telecommunications, and transportation.

Download 1z0-1091-22 Exam Dumps Questions to get 100% Success: https://www.premiumvcedump.com/Oracle/valid-1z0-1091-22-premium-vce-exam-dumps.html

Premium VCE Dumps

Premium VCE Dumps

Prepare For Realistic 1z0-1091-22 Dumps PDF – 100% Passing Guarantee [Q29-Q43]

Leave a Reply Cancel reply