NO.83 You have a Windows Server container host named Server1 that has a single disk.
On Server1, you plan to start the containers shown in the following table.

Which isolation mode can you use for each container? To answer, select the appropriate options in the answer area.
NOTE: Each correct selection is worth one point.

NO.84 You have servers that have the DNS Server role installed. The servers are configured as shown in the following table.

All the client computers in the New York office use Server2 as the DNS server.
You need to configure name resolution in the New York office to meet the following requirements:
Ensure that the client computers in New York can resolve names from contoso.com.
Ensure that Server2 forwards all DNS queries for internet hosts to 131. 107.100.200.
The solution must NOT require modifications to Server1.
Each correct answer presents part of the solution.
NOTE: Each correct selection is worth one point.

NO.85 You need to meet the technical requirements for VM1.
Which cmdlet should you run first? To answer, select the appropriate options in the answer area.
NOTE: Each correct selection is worth one point.

NO.86 Your network contains an Active Directory Domain Services (AD DS) domain named contoso.com.
The network contains the servers shown in the following table.

You plan to implement IP Address Management (IPAM).
You need to use the Group Policy based provisioning method for managed servers. The solution must support server discovery.
What should you do? To answer, select the appropriate options in the answer area.
NOTE: Each correct selection is worth one point.

NO.87 Your network contains an Active Directory Domain Services (AD DS) domain named contoso.com. The domain contains the VPN servers shown in the following table.

You have a server named NPS1 that has Network Policy Server (NPS) installed. NPS1 has the following RADIUS clients:

VPN1, VPN2, and VPN3 use NPS1 for RADIUS authentication. All the users in contoso.com are allowed to establish VPN connections. For each of the following statements, select Yes If the statement is true. Otherwise, select No. NOTE: Each correct selection is worth one point.

NO.88 You deploy a new Active Directory Domain Services (AD DS) forest named contoso.com. The domain contains three domain controllers named DC1, DC2, and DC3.
You rename Default-First-Site-Name as Site1.
You plan to ship DC1, DC2, and DC3 to datacenters in different locations.
You need to configure replication between DC1, DC2, and DC3 to meet the following requirements:
Each domain controller must reside in its own Active Directory site.
The replication schedule between each site must be controlled independently.
Interruptions to replication must be minimized.
Which three actions should you perform in sequence in the Active Directory Sites and Services console? To answer, move the appropriate actions from the list of actions to the answer area and arrange them in the correct order.

NO.89 You have on-premises servers that run Windows Server as shown in the following table.

You have an Azure file share named share1 that stores two files named File2.docx and File3.docx.
You create an Azure File Sync sync group that includes the following endpoints:
share
D:Folder1 on Server1
D:Datal on Server2
For each of the following statements, select Yes if the statement is true. Otherwise, select No.
NOTE: Each correct selection is worth one point.

NO.90 You have an Active Directory Domain Services (AD DS) domain. The domain contains a member server named Server1 that runs Windows Server.
You need to ensure that you can manage password policies for the domain from Serve1.
Which command should you run first on Server1?

NO.91 You have an on-premises server named Server1 that runs Windows Server and has internet connectivity.
You have an Azure subscription.
You need to monitor Server1 by using Azure Monitor.
Which resources should you create in the subscription, and what should you install on Server1? To answer, select the appropriate options in the answer area.
NOTE: Each correct selection is worth one point.

NO.92 You need to meet the technical requirements for VM3
On which volumes can you enable Data Deduplication?

NO.93 You have two on-premises servers named Server1 and Servet2 that run Windows Server.
You have an Azure Storage account named storage1 that contains a file share named share’. Server1 syncs with share1 by using Azure File Sync You need to configure Server2 to sync with share1.
Which three actions should you perform in sequence? To answer, move the appropriate actions from the list of actions to the answer area and arrange them in the correct order.

NO.94 Your network contains an Active Directory Domain Services (AD DS) forest. The forest contains three Active Directory sites named Site1, Site2, and Site3. Each site contains two domain controllers. The sites are connected by using DEFAULTIPSITELINK.
You open a new branch office that contains only client computers.
You need to ensure that the client computers in the new office are primarily authenticated by the domain controllers in Site1.
Solution: You configure the Try Next Closest Site Group Policy Object (GPO) setting in a GPO that is linked to Site1.
Does this meet the goal?

NO.95 Your network contains two VLANs for client computers and one VLAN for a datacenter Each VLAN is assigned an IPv4 subnet Currently, all the client computers use static IP addresses.
You plan to deploy a DHCP server to the VLAN in the datacenter.
You need to use the DHCP server to provide IP configurations to all the client computers.
What is the minimum number of scopes and DHCP relays you should create? To answer, select the appropriate options in the answer area.
NOTE: Each correct selection is worth one point.

NO.96 Hotspot Question
You have a Windows Server container host named Server1 that has a single disk.
On Server1, you plan to start the containers shown in the following table.

Which isolation mode can you use for each container? To answer, select the appropriate options in the answer area.
NOTE: Each correct selection is worth one point.

NO.97 You have a file server named Server1 that runs Windows Server and contains the volumes shown in the following table.

On which volumes can you use BitLocker Drive Encryption (BitLocker) and disk quotas? To answer select the appropriate options in the answer are a. NOTE Each correct selection is worth one point.

NO.98 You are the system administrator in the Cosco company. Your manager has asked you to create a new image. To achieve this, you created a Dockerfile and saved it to the disk. The next step would be to run the _________ command to create the new images.

NO.99 You have an on-premises Active Directory Domain Services (AD DS) domain that syncs with an Azure Active Directory (Azure AD) tenant You have an on-premises web app named WebApp1 that only supports Kerberos authentication.
You need to ensure that users can access WebApp1 by using their Azure AD account. The solution must minimize administrative effort.
What should you configure? To answer, select the appropriate options in the answer area.
NOTE: Each correct selection is worth one point.

NO.100 Note: This question is part of a series of questions that present the same scenario. Each question in the series contains a unique solution that might meet the stated goals. Some question sets might have more than one correct solution, while others might not have a correct solution.
After you answer a question in this section, you will NOT be able to return to it. As a result, these questions will not appear in the review screen.
You are planning the deployment of DNS to a new network.
You have three internal DNS servers as shown in the following table.

The contoso.local zone contains zone delegations for east.contoso.local and west.contoso.local.
All the DNS servers use root hints.
You need to ensure that all the DNS servers can resolve the names of all the internal namespaces and internet hosts.
Solution: On Server2, you create a conditional forwarder for west.contoso.local. On Server3, you create a conditional forwarder for east.contoso.local.
Does this meet the goal?

NO.101 Which groups can you add lo Group3 and Groups? To answer, select the appropriate options in the answer are a. NOTE Each correct selection is worth one point.

NO.102 You need to meet the technical requirements for VM3
On which volumes can you enable Data Deduplication?