Juniper JN0-649 Practice Test Pdf Exam Material [Q24-Q45]

2 Aug, 2024 By admin JN0-649, Juniper 0 Comments

Juniper JN0-649 Practice Test Pdf Exam Material [Q24-Q45]

5/5 - (1 vote)

Juniper JN0-649 Practice Test Pdf Exam Material

JN0-649 Answers JN0-649 Free Demo Are Based On The Real Exam

NEW QUESTION 24
You are redistributing static routes into an OSPF area. Which two statement are true is this scenario? (Choose two.)

The external route advertisements have a domain scope.

The area must be stub area.

The area must be the backbone area.

The routes can be advertised in type LSAs.

NEW QUESTION 25
Which two port modes are associated with STP? (Choose two.)

alternate port

backup port

designated

root

NEW QUESTION 26
Click the Exhibit button. Referring to the exhibit, how is R5 able to learn the networks that exist within the NSSA?

R5 learns those networks from Type 3 LSAs advertised by R2.

R5 learns those networks from Type 3 LSAs advertised by R3.

R5 does not learn those networks and uses a default route advertised by R3 instead.

R5 does not learn those networks but uses a default route advertised by R2 instead.

NEW QUESTION 27
Referring to the exhibit, anycast RP is implemented to ensure multicast service availability. The source is currently sending multicast traffic using group 239.1.1.1 and R3 is receiving PIM register messages, but R2 does not have active source information.
In this scenario, what are two methods to receive the active source information on R2? (Choose two.)

Configure an RP set in PIM on R1, allowing R1 to forward PIM register messages to R2 and R3 in the set.

Configure an MSDP protocol between R2 and R3.

Configure an RP set in PIM on R2 and R3, allowing the RPs to forward PIM register messages to the other RPs in the set.

Configure an MSDP protocol between R1 and R2.

NEW QUESTION 28
You are implementing 802.1x access control in your network of EX Series switches. You have some older client devices connecting to your network which do not support 802.1x.
Which statement is true regarding the older devices?

By default, the supplicant will send EAP messages and keep the port in an unauthorized state.

By default, the authenticator will send EAP messages and keep the port in an unauthorized state.

By default, the supplicant will send EAP messages until it reaches a predefined limit, after which it begins to forward traffic.

By default, the authenticator will send EAP messages until it reaches a predefined, after which it begins to forward traffic.

NEW QUESTION 29
Referring to the exhibit, which two statements are correct? (Choose two.)

BPDUs from the root bridge for VLAN 10 have been received on the ge-0/0/7.0 interface.

DS-1 is the root bridge for VLAN 10.

BPDUs from the root bridge for VLAN 20 have been received on the ge-0/0/7.0 interface.

Default VSTP bridge priority values are configured.

NEW QUESTION 30
Referring to the exhibit, which statement is correct when a failure exists on the link between host2 and switch5 on this EVPN-VXLAN fabric?

The switch5 device will send a Type 2 route to all peers.

The switch5 device will send a Type 4 route to all peers.

The switch5 device will send a Type 1 route to all peers.

The switch5 device will send a Type 3 route to all peers.

NEW QUESTION 31
You are configuring, the PVLAN feature on your switches. The PVLAN will span the two EX Series switches shown in the exhibit.
Which three configuration parameters must be enabled on the ports connecting the two switches?
(Choose three. )

family inet

interface-mode access

interface-mode trunk

family Ethernet-switching

inter-switch-link

NEW QUESTION 32
What is the correct authentication processing order on EX Series switches when multiple Layer 2 authentication methods are enabled?

captive portal-> MAC RADIUS -> 802.1x

802.1x-> captive portal -> MAC RADIUS

MAC RADIUS -> 1x -> captive portal

802.1x -> MAC RADIUS -> captive portal

NEW QUESTION 33
In OSPF, how does a router ensure that LSAs advertised to a neighboring router are received?

LSA flooding guarantees that all routers will receive them successfully.

LSAs are sent over a TCP connection.

LSAs are acknowledged by the neighboring router.

LSAs are advertised with an acknowledgement bit.

NEW QUESTION 34
What allows non-Web enabled devices to access the network on a port configured for captive portal?

A MAC address white list can be configured on the switch to allow specific MAC addresses to bypass the captive portal process.

LLDP can be used to query the type of device that is attempting to access the network, and predefined device types can be allowed to bypass the captive portal process.

Captive portal can be configured to only prompt for credentials when HTTP or HTTPS traffic is requested on a port to allow on-HTTP enabled devices access to the network.

Authentication credentials for specific devices can be preconfigured on the switch for automatic authentication.

NEW QUESTION 35
You must provide network connectivity to hosts that fail authentication.
In this scenario, what would be used in a network secured with 802.1X to satisfy this requirement?

Configure the native-vlan-id parameter on the port.

Use the server-reject-vlan command to specify a guest VLAN.

Configure a secondary IP address on the port for unauthenticated hosts.

Configure the port as a spanning tree edge port.

NEW QUESTION 36
You have configured class mode power management on an EX4300 to provide PoE power to telephone and security camera equipment. You want to ensure that security camera power takes priority over telephone power.
Which two actions would solve this problem? (Choose two.)

Connect the security cameras to the lowest port numbers on the switch.

Set the power priority to high on ports connected to security cameras.

Set the maximum power settings on ports connected to security cameras.

Set the power priority to low on ports connected to security cameras.

NEW QUESTION 37
You are asked to configure 802.1X on your access ports to allow only a single device to authenticate.
In this scenario, which configuration would you use?

single supplicant mode

multiple supplicant mode

single-secure supplicant mode

MAC authentication mode

NEW QUESTION 38
Which two multicast listener registration protocols are supported in the Junos operating system? (Choose two.)

MLD

DVMRP

IGMP

PIM

NEW QUESTION 39
You will to route Layer 3 PVLAN traffic within the secondary VLAN.
What is required to accomplish this task?

a community VIAN

an IRB

an FBF policy

an isolated VLAN

NEW QUESTION 40
Referring to the exhibit, you have placed the cos multifield classifier on all edge interfaces and configured the relevant CoS parameters.
In this scenario, which two statements are correct? (Choose two.)

SSH traffic using the default port will be placed in the af forwarding class and accepted.

SSH traffic using the default port will be placed in the best-effort forwarding class and accepted.

UDP traffic using the 16000 port will be placed in the voice forwarding class and accepted.

UDP traffic using the 16000 port will be placed in the best-effort forwarding class and accepted.

NEW QUESTION 41
Which three MSTP parameters must match on all switches in the same MST region? (Choose three.)

forwarding delay

bridge priority

revision number

MSTI-to-VLAN mapping

configuration name

NEW QUESTION 42
You are asked to establish interface level authentication for users connecting to your network.
You must ensure that only corporate devices, identified by MAC addresses, are allowed to connect and authenticate. Authentication must be handled by a centralized server to increase scalability. Which authentication method would satisfy this requirement?

MAC RADIUS

captive portal

802.1X with single-secure supplicant mode

802.1X with multiple supplicant mode

NEW QUESTION 43
Referring to the exhibit, which two statements are correct? (Choose two.)

The BGP neighbor can advertise L3 VPN related routes.

The BGP neighbor cannot advertise EVPN related routes.

The BGP neighbor can advertise EVPN related routes.

The BGP neighbor cannot advertise L3 VPN related routes.

NEW QUESTION 44
You are running OSPF as your IGP. The interfaces connecting two routers are in the ExStart state. You notice that something is incorrect with the configuration.
Referring to the exhibit, which statement is correct?

The subnet mask is incorrect.

The MTU setting are incorrect.

The interface type is incorrect.

The IP addresses are incorrect.

NEW QUESTION 45
Remote branches connect to the corporate WAN through access switches. The access switches connect to access ports on the WAN distribution switch, as shown in the exhibit. L2PT has previously been configured on the tunnel Layer 2 traffic across the WAN. You decide to move the L2PT tunnel endpoints to the access switches. When you apply the L2PT configuration to the access switches, the ports that connect the access switches to the distribution switch shut down.
Which action would solve this problem?

Configure the links between the access switches and the distribution switch as a trunk port.

Disable the BPDU block function on the access switches.

Disable the BPDU block function on the distribution switch.

Configure a GRE tunnel to encapsulate the L2PT traffic across the WAN.

Juniper JN0-649 (Enterprise Routing and Switching, Professional (JNCIP-ENT)) Certification Exam is designed for IT professionals who specialize in enterprise routing and switching technologies. Enterprise Routing and Switching, Professional (JNCIP-ENT) certification exam validates the knowledge and skills required to design, configure, and troubleshoot Juniper Networks enterprise routing and switching platforms.

JN0-649 [Aug-2024] Newly Released] Exam Questions For You To Pass: https://www.premiumvcedump.com/Juniper/valid-JN0-649-premium-vce-exam-dumps.html

Premium VCE Dumps

Premium VCE Dumps

Juniper JN0-649 Practice Test Pdf Exam Material [Q24-Q45]

Leave a Reply Cancel reply