Apr-2024 HP HPE6-A75 Actual Questions and 100% Cover Real Exam Questions [Q30-Q44]

27 Apr, 2024 By admin HPE6-A75, HP 0 Comments

Apr-2024 HP HPE6-A75 Actual Questions and 100% Cover Real Exam Questions [Q30-Q44]

Rate this post

Apr-2024 HP HPE6-A75 Actual Questions and 100% Cover Real Exam Questions

HPE6-A75 Free Exam Questions and Answers PDF Updated on Apr-2024

Achieving the Aruba Certified Edge Professional certification can open up new career opportunities for IT professionals. Aruba Certified Edge Professional Exam certification is recognized globally and is highly respected in the industry. It demonstrates that the individual has the necessary knowledge and skills to design and manage Aruba wireless networks in complex enterprise environments, making them a valuable asset to any organization.

HPE6-A75 exam covers a wide range of topics related to wireless networking, such as configuring and troubleshooting Aruba wireless networks, working with access points and controllers, and implementing security measures to protect wireless networks from unauthorized access. HPE6-A75 exam also evaluates the candidate’s ability to manage and optimize network performance, as well as their knowledge of industry-standard wireless technologies.

NEW QUESTION 30
Refer to the exhibit.

When configuring a Web Login Page in ClearPass Guest, the information shown is displayed.
What is the Address field value ‘securelogin.arubanetworks.com’ used for?

for ClearPass to send a TACACS+ request to the NAD

for appending to the Web Login URL, before the page name

for the client to POST the user credentials to the NAD

for ClearPass to send a RADIUS request to the NAD

for appending to the Web Login URL, after the page name.

NEW QUESTION 31
Refer to the exhibit.

Based on the Attribute configuration shown, which statement accurately describes the status of attribute values?

Only the attribute values of department and memberOf can be used in role mapping policies.

The attribute values of department, title, memberOf, telephoneNumber, and mail are directly applied as ClearPass.

Only the attribute value of company can be used in role mapping policies, not the other attributes.

The attribute values of department and memberOf are directly applied as ClearPass roles.

Only the attribute values of title, telephoneNumber, and mail can be used in role mapping policies.

NEW QUESTION 32
Refer to the exhibit.

Traffic between the servers m Area l takes a less optimal path rather than the link associated with VLAN l OOO, subnet 10.0.0.0/30. Based on the exhibits, why is this the case?

The metric on the VLAN 1000 interface is too low.

Switch-1 and Switch-2 cannot achieve adjacency on VLAN 1000 due to mismatches.

OSPF routing switches choose the best intra-area routes based on Area 1 links only.

The link between Switch-1 and Switch-2 has gone down.

NEW QUESTION 33
The administrator expects the AP to connect to a cluster, but the AP tails to connect. The administrator examines the configuration of an AP from apboot mode shown in the exhibit. What can the administrator determine about the configuration of the AP?

The AP is configured to terminate on a non-cluster Mobility Controller.

The AP is configured as a RAP to terminate on a stand-alone controller.

The AP is configured as a RAP to terminate on a Mobility Master.

The AP is configured to terminate on a Mobility Controller in a cluster.

NEW QUESTION 34
An administrator needs to authenticate users connected to an ArubaOS Switch where the switch authenticates the user, assigns the firewall policies to the user, and processes some of the users’ traffic. Which connection method should the administrator configure on the ArubaOS-Switch?

Per-user tunneled node

Split-tunneled mode

Per-port tunneled node

VLAN tunneled mode

NEW QUESTION 35
Refer to the exhibits.

Refer to the exhibits. The network administrator enters the commands shown in Exhibit 2. What is the spanning tree status on Al and A2?

A1 towards traffic, and A2 blocks traffic.

Both Al and A2 block traffic.

A1 blocks traffic, and A2 forwards traffic.

Both A1 and A2 forward traffic

NEW QUESTION 36
An AOS-Switch has type of service disabled on it globally. The administrator enters:
AOS-Switch(config)# interface 1 qos trust device aruba-ap
What is the effect of this command?

if the AOS-Switch is integrated with an Aruba Mobility Controller, it uses QoS settings send by the controller to prioritize traffic sent on interface 1

if interface 1 connects to an Aruba AP, it uses the incoming DSCP and a global DSCP map to prioritize traffic received on this interface

if the AOS-Switch is integrated with an Aruba Mobility Controller, it uses QoS settings sent by the controller to classify traffic received on interface 1

if interface connects to an Aruba AP, the switch marks all traffic received on the interface with a higher than default priority value

NEW QUESTION 37
An administrator implements the MultiZone feature and uses two clusters that utilize CPSec. A primary and a data zone are created. MultiZone APs successfully build sessions to the primary cluster but fail to establish sessions to the data zone cluster.
What must the administrator do to solve this problem?

Enable CPSec in the MultiZone profile for both the primary and data zone.

Enable MultiZone booting in the MultiZone AP apboot configuration mode.

Add the MultiZone APs to the data zone’s CPSec whitelist.

Use different AP Group names for the two zones.

NEW QUESTION 38
A network administrator wants to use Aruba AirWave to audit an AOS-Switch configuration. What rs one requirement?

The switch defines the AirWave IP address in its zero touch provisioning (ZTP) profile.

The switch specifies the AirWave IP address for the RADIUS server used for Telnet and SSH authentication.

The switch is authorized in AirWave, which has the correct credentials to log in as a CLI manager.

The switch is set to Manage Read-Write mode in AirWave but is not set to Monitor Only + Firmware Updates.

NEW QUESTION 39
Refer to the exhibit.

A company has attempted to implement OSPF without success. The devices in Area I need to be able to reach Area 2. Routes should be aggregated for advertisement in other areas. What must be changed to meet these requirements?

Change Area 3 to Area 0; remove Area 1 from Switch-2 and Area 2 from Switch-1.

Add the 10.2.0.0/16 range on Swttch-1 and the 10.1.0.0/16 range on Switch-2.

Add Area 1 and Area 2 on VIAN 100 on both Switch-1 and Switch-2. Remove Area 3.

Move the 10.1.0.0/16 range to Area 2 on Switch-1 and the 10.2.0.0/16rangetoArea 1 onSwitch-2.

NEW QUESTION 40
Refer to the exhibit.

The network administrator wants to reduce failover time If a switch link m VIAN 100 goes down. What should the administrator do?

Configure echo mode BFD on VLAN 100 on all OSPF routing devices on VLAN 100.

Lower the dead timer on the BDR of VLAN 100.

Lower the hello timer only on the BDR of VLAN 100.

Configure graceful restart on all of the OSPF routing devices on VLAN 100.

NEW QUESTION 41
Refer to the exhibit.

Based on the Policy configuration shown, which VLAN will be assigned when a user with ClearPass role Engineer authenticates to the network successfully on Saturday using connection protocol WEBAUTH?

Deny Access

Employee VLAN

Internet VLAN

Full Access VLAN

NEW QUESTION 42
A company has AOS-Switches deployed at sites with inexperienced IT staff. The main office network administrators want to track if configurations change on branch switches. What should be set up for this purpose?

an SNMP trap

an RMON alarm

an auto-config server

an lP SLA profile

NEW QUESTION 43
Refer to the exhibit.

An administrator implements AP licensing on a Mobility Master (MM).
– Each campus is responsible to purchase its own AP licenses.
– There are 900 AP licenses deployed in the global pool.
– There are three dedicated pools.
– From the global pool, 300 AP licenses are assigned to each dedicated
pool.
Network engineers at CampusA want to deploy an additional 100 APs. Currently all of the AP licenses in CampusA and CampusB are allocated, but only 200 of the AP licenses in CampusC are allocated.
What can the administrator do to add capacity for CampusA in alignment with campus policies?