Pass Exam Questions Efficiently With JN0-451 Questions (2023) [Q11-Q32]

6 Jun, 2023 By admin JN0-451, Juniper 0 Comments

Pass Exam Questions Efficiently With JN0-451 Questions (2023) [Q11-Q32]

Rate this post

Pass Exam Questions Efficiently With JN0-451 Questions (2023)

JN0-451 Questions – Truly Beneficial For Your Juniper Exam

Juniper JN0-451 Exam Syllabus Topics:

Topic	Details
Topic 1	Wireless intrusion detection and prevention Identify the concepts or functionality of WLANs
Topic 2	Demonstrate knowledge of wireless configuration or troubleshooting SLE troubleshooting SLE configuration
Topic 3	Identify the concepts of the Juniper Mist Cloud architecture Configuration objects Organization objects RESTful API concepts
Topic 4	Account organization and subscriptions Juniper Mist WLAN Architecture and Deployment
Topic 5	Identify the concepts or methods of location-based services (LBS) Proximity tracing, Asset visibility, Wi-Fi location
Topic 6	Network arbitration and contention Identify the concepts or functionality of basic Wi-Fi technologies
Topic 7	Identify the components of Juniper Mist network operations Juniper Mist Network Operations

NEW QUESTION 11
Which two Mist Aps would be used for BLE location? (Choose two.)

AP12

AP33

AP32

AP43

NEW QUESTION 12
What are basic data rates?

fastest data rates

optional data rates

required data rates

disabled data rates

NEW QUESTION 13
Which two statements are correct about channel bonding? (Choose two.)

Bonding two channels together doubles the available bandwidth.

Bonding two channels together doubles the required device resources.

Bonding two channels together doubles the noise floor.

Bonding two channels together doubles the number of available channels.

NEW QUESTION 14
Some users cannot connect to the network. You want to identify these users. In Marvis, which query accomplishes this task?

troubleshoot access points

unhappy clients

troubleshoot clients

list clients

NEW QUESTION 15
Which access points (APs) will be considered for inclusion in the AP Offline Marvis Action?

all APs assigned to sites that have connected to the cloud previously

all APs assigned to sites

all APs in inventory

all purchased APs

NEW QUESTION 16
Asset tracking using Mist-supported third-party BLE beacons has been installed in a warehouse. The BLE beacons were configured using their manufacturer-supplied configuration utility and BLE was properly configured for the site settings. When the warehouse floor plan is opened in Live View, the third-party beacons are not shown.
Which two statements describe causes for this issue? (Choose two.)

The Show assets check box has not been selected in Live View.

Marvis was not enabled for the site.

The Locate this Client as an Asset check box has not been selected at the BLE client level.

The APs are installed at 19 feet from the floor, above the recommended 15 feet.

NEW QUESTION 17
Mist WLAN objects are configurable at which two levels? (Choose two.)

site group

organization

site

access point

NEW QUESTION 18
A retail customer has legacy 2.4 GHz scanners that need to connect to the WLAN, but they are not connecting.
Which WLAN data rate setting is required for these devices to connect?

Custom Rates

Compatible

High Density

No Legacy

NEW QUESTION 19
According to the 802.11 standard, how wide are 2.4 GHz band OFDM channels?

5 MHz

22 MHz

20 MHz

3 MHz

NEW QUESTION 20
You are deploying multiple Mist APs across many sites in your network. You must ensure that you apply consistent WxLAN and WLAN policies across all sites within the same organization.
Which configuration object should be used to accomplish this behavior?

site labels

an RF template

a device profile

a config template

NEW QUESTION 21
The customer wants to broadcast a WLAN at a certain time and day of the week.
Which statement is correct in this scenario?

Third-party integration is required to achieve this requirement.

Mist supports this function with an additional subscription.

APs need to be upgraded for this feature.

SSID scheduling should be configured.

NEW QUESTION 22
Referring to the exhibit, you asked Marvis to troubleshoot a client. In this scenario, what did Marvis determine?

two authentication failures over this week

two DHCP failures today

DHCP errors over the past seven days

two authentication failures today

NEW QUESTION 23
Which two SLEs measure the amount of time that it takes for a process to complete? (Choose two.)

roaming

AP uptime

throughput

time to connect

NEW QUESTION 24
Your customer added an Apple TV in their conference room so that employees can easily share their screen.
However, the Apple TV cannot be discovered by the employees’ devices.
Which two settings are causing the problem? (Choose two.)

MDNS

Broadcast/Multicast

Ignore Broadcast SSID Probe Requests

ARP

NEW QUESTION 25
Click the Exhibit button.

Referring to the exhibit, which statement is true?

The WLAN is configured to use DFS channels.

The WLAN is configured to only broadcast on the 2.4 GHz spectrum.

The WLAN is configured with the high-density data rate setting enabled.

The WLAN is configured to use geofencing.

NEW QUESTION 26
What are basic data rates?

disabled data rates

fastest data rates

optional data rates

required data rates

NEW QUESTION 27
Your organization has recently purchased new VoIP handsets. All of the VoIP handsets fail to connect to the corporate WLAN. However, all other devices connect successfully. You expect that there might be a bug with the new handsets. The vendor asks you to provide a pcap file of the handsets’ connection attempts.
Which Juniper Mist feature will provide this file?

Dynamic Packet Capture

Service Level Expectations

Clients Insights

Alerts dashboard

NEW QUESTION 28
You are deploying multiple Mist APs across many sites in your network. You must ensure that you can group similar devices together to easily apply consistent WxLAN policies across multiple sites.
Which configuration object should be used to accomplish this behavior?

organization labels

device profile

RF template

radio management

NEW QUESTION 29
Asset tracking using Mist-supported third-party BLE beacons has been installed in a warehouse. The BLE beacons were configured using their manufacturer-supplied configuration utility and BLE was properly configured for the site settings. When the warehouse floor plan is opened in Live View, the third-party beacons are not shown.
Which two statements describe causes for this issue? (Choose two.)

The Show assets check box has not been selected in Live View.

Marvis was not enabled for the site.

The Locate this Client as an Asset check box has not been selected at the BLE client level.

The APs are installed at 19 feet from the floor, above the recommended 15 feet.

NEW QUESTION 30
All the access points (APs) on the site will obtain an IP address for the Management VLAN. You notice an additional IP address for each configured VLAN on the AP.
Which statement is correct in this scenario?

The AP is configured to support wireless mesh.

This behavior is enabled by default under the Site configuration.

The Local Status Page has been enabled in the AP setting under the Site configuration.

The AP MAC has a DHCP reservation.

NEW QUESTION 31
Click the Exhibit button.

Referring to the exhibit, as part of the Throughput SLE in the Mist UI, the Coverage classifier indicates the signal strength of which device?

the AP’s radio strength

the signal strength between APs

the client

the AP’s radio for a single SSID

NEW QUESTION 32
Your customer added an Apple TV in their conference room so that employees can easily share their screen. However, the Apple TV cannot be discovered by the employees’ devices.
Which two settings are causing the problem? (Choose two.)

MDNS

Broadcast/Multicast

Ignore Broadcast SSID Probe Requests

ARP